Author Topic: 1968 Rocker Panel Mouldings  (Read 835 times)

Offline 7777kx

  • Newbie
  • *
  • Posts: 2
1968 Rocker Panel Mouldings
« on: December 05, 2016, 02:53:02 PM »
Could any forum member help with some information i first saw on this site. It was about attaching rocker panel mouldings by the knowlegable J. Speegle. I have a copy of the article but i think there were copies of Factory drawings to position parts with it.
I cannot find this article now....can anybody help with this?
Much appreciated
Alan
« Last Edit: December 05, 2016, 04:18:23 PM by J_Speegle »

Offline J_Speegle

  • Administrator
  • Hero Member
  • *****
  • Posts: 24173
Re: 1968 Rocker Panel Mouldings
« Reply #1 on: December 05, 2016, 04:37:22 PM »
First welcome to the site - hope you find what your looking for, related to concours, your looking for

Doubt it was my comments you were reading as I've sort of stood back and let some of the others run with this subject and only poked my nose in when I thought I might have sometime to help. Has been a popular subject here

There were at least two or three threads (a search will turn them up if you check) The most recent that was an overall summary is below. I've taken the info from that and started to combine it into an article for the Library but have gotten side tracked with other demands and the Holidays. Just had to redo all the drawings - sorry anal that way

Hope you find what your looking for. Bob did a great summary - Thanks Bob   :)

http://www.concoursmustang.com/forum/index.php?topic=14077.0

Other related threads - since your new here ;)


http://www.concoursmustang.com/forum/index.php?topic=12559.msg76260#msg76260

http://www.concoursmustang.com/forum/index.php?topic=13049.msg82951#msg82951

http://www.concoursmustang.com/forum/index.php?topic=3863.msg21105#msg21105


http://www.concoursmustang.com/forum/index.php?topic=7488.msg42568#msg42568

http://www.concoursmustang.com/forum/index.php?topic=13836.msg85947#msg85947

Jeff Speegle

Anything worth doing is worth doing concours ;)

Offline 7777kx

  • Newbie
  • *
  • Posts: 2
Re: 1968 Rocker Panel Mouldings
« Reply #2 on: December 07, 2016, 02:33:16 AM »
Hello Jeff,
     Thank you for all your help and the links, which is very much apppreciated and of course, thanks to the other forum users who contribute their vast knowledge.
I think you know one of my very good friends here in the UK, Chris Lowden with Carry-Over #240...he speaks very highly of you.
regards
Alan