Author Topic: Part Number Identification.  (Read 2592 times)

1967 eight barrel

  • Guest
Part Number Identification.
« on: May 08, 2016, 01:48:28 AM »
Does anyone have an application for this part number?  C7ZB-13875-A?
I'll explain when I have responses.

Offline preaction

  • Hero Member
  • *****
  • Posts: 1323
Re: Part Number Identification.
« Reply #1 on: May 08, 2016, 11:10:57 AM »
Switch assembly-horn blowing ? :)
8F02R218047-  July 18 1968   Dearborn

Offline WT8095

  • Hero Member
  • *****
  • Posts: 940
  • Dave Z.
Re: Part Number Identification.
« Reply #2 on: May 08, 2016, 11:34:43 AM »
Are you sure it's not "C9ZB"?
Dave Z.

'68 fastback, S-code + C6. Special Paint (Rainbow promotion), DSO 710784. Actual build date 2/7/1968, San Jose.
'69 Cougar convertible, 351W-2V + FMX, Meadowlark Yellow.

Offline J_Speegle

  • Administrator
  • Hero Member
  • *****
  • Posts: 24174
Re: Part Number Identification.
« Reply #3 on: May 08, 2016, 05:03:25 PM »
Couldn't find it in a MPC from the production period possibly a later service part.
Jeff Speegle

Anything worth doing is worth doing concours ;)

1967 eight barrel

  • Guest
Re: Part Number Identification.
« Reply #4 on: May 08, 2016, 06:30:40 PM »
ECS has them as 1967 Shelby inboard lamp harness tags. I found nothing for them either.

Offline Bob Gaines

  • Global Moderator
  • Hero Member
  • ****
  • Posts: 8953
Re: Part Number Identification.
« Reply #5 on: May 08, 2016, 08:27:41 PM »
ECS has them as 1967 Shelby inboard lamp harness tags. I found nothing for them either.
That harness was made up at SA specifically for the 67 Shelby. the tag would not be appropriate for a restoration that is meant to look like as delivered. If a tag was attached to a service harness (never seen one but maybe) it would most likely have a S7MS prefix since it is Shelby unique. This seems to be another incorrect tag for a 67 Shelby application. The first one you wrote about recently was a headlight harness.  This is highly unusual for ECS as they are typically very authentic.
Bob Gaines,Shelby enthusiast, Shelby collector , Shelby concours judge SAAC,MCA,Mid America Shelby

1967 eight barrel

  • Guest
Re: Part Number Identification.
« Reply #6 on: May 10, 2016, 12:12:29 AM »
Bob,
I didn't use either tag. No tag on the individual inboards. I used the Red tag specific to headlamp harness that would be consistent with tach usage.

                                                                                                           -Keith

Offline Bob Gaines

  • Global Moderator
  • Hero Member
  • ****
  • Posts: 8953
Re: Part Number Identification.
« Reply #7 on: May 10, 2016, 03:14:33 AM »
Bob,
I didn't use either tag. No tag on the individual inboards. I used the Red tag specific to headlamp harness that would be consistent with tach usage.

                                                                                                           -Keith
Glad to hear it. The vast majority of ECS tags are spot on.
Bob Gaines,Shelby enthusiast, Shelby collector , Shelby concours judge SAAC,MCA,Mid America Shelby