Author Topic: WTB: Rear bumper guards 1967 incl. rubber pad  (Read 1519 times)

Offline Ralf

  • Hero Member
  • *****
  • Posts: 656
  • http://mustang-cabrio-67.jimdo.com/
WTB: Rear bumper guards 1967 incl. rubber pad
« on: November 20, 2016, 01:00:10 PM »
Looking for a nice set of 67 rear bumber guards incl. rubber pads and mounting kit, ideally in black colour.
Thx Ralf
1967 Convertible 289, C4 Automatic, Built Nov 30 1966, SJ, DSO75.
Pictures: https://mustang-cabrio-67.jimdo.com/mustang-1967-impressionen

Offline Ralf

  • Hero Member
  • *****
  • Posts: 656
  • http://mustang-cabrio-67.jimdo.com/
Re: WTB: Rear bumper guards 1967 incl. rubber pad
« Reply #1 on: February 18, 2017, 02:51:23 PM »
Up...
1967 Convertible 289, C4 Automatic, Built Nov 30 1966, SJ, DSO75.
Pictures: https://mustang-cabrio-67.jimdo.com/mustang-1967-impressionen

Offline Ralf

  • Hero Member
  • *****
  • Posts: 656
  • http://mustang-cabrio-67.jimdo.com/
Re: WTB: Rear bumper guards 1967 incl. rubber pad
« Reply #2 on: April 10, 2017, 01:41:43 PM »
Still needed.
1967 Convertible 289, C4 Automatic, Built Nov 30 1966, SJ, DSO75.
Pictures: https://mustang-cabrio-67.jimdo.com/mustang-1967-impressionen

Offline Ralf

  • Hero Member
  • *****
  • Posts: 656
  • http://mustang-cabrio-67.jimdo.com/
Re: WTB: Rear bumper guards 1967 incl. rubber pad
« Reply #3 on: August 11, 2017, 09:11:17 AM »
Still valid.
My search was not successful so far. What I saw was mostly ready to scrap.
Looking for a nice used OEM set w/o twisted/bended brackets. Straight with no dents.
If new paint required...ok.
thx
Ralf
1967 Convertible 289, C4 Automatic, Built Nov 30 1966, SJ, DSO75.
Pictures: https://mustang-cabrio-67.jimdo.com/mustang-1967-impressionen

Offline 67gtasanjose

  • Hero Member
  • *****
  • Posts: 5084
  • "Take the MUSTANG PLEDGE"
Re: WTB: Rear bumper guards 1967 incl. rubber pad
« Reply #4 on: August 11, 2017, 09:40:38 AM »
fwiw Ralf, replacement impact strips are slightly different than OE strips (at least they were on mine). It could be a "maker" thing, I do not know but I would assume with your build date and location would be the same as mine. The details are subtle but when you know they differ, you cannot unlearn it. I'm saying if you find originals with original strips still in good condition, you are better off than later service replacements or aftermarkets.   
Richard Urch

1967 (11/2/66, S.J.) GTA Luxury Coupe, 289-4V w/Thermactor Emissions, C-4, Int./Ext. Decor +many options

2005 (04/05) GT Premium Convertible, Windveil Blue, Parchment Top w/Med. Parchment interior,  Roush Body Appointments

Offline 67_1183

  • Newbie
  • *
  • Posts: 33
2nd owner of 1967 GT-500 #1183 since September 1976

Offline Ralf

  • Hero Member
  • *****
  • Posts: 656
  • http://mustang-cabrio-67.jimdo.com/
Re: WTB: Rear bumper guards 1967 incl. rubber pad
« Reply #6 on: August 12, 2017, 03:42:44 AM »
Yes, exactly. But Bob unfortunately is not shipping to GER as far as I know. Or Bob?
And these are 68 if I'm not mistaken (because of the rubber conus). Not sure if 67 had those?
But doesn't matter so much.
« Last Edit: August 12, 2017, 03:46:09 AM by Ralf »
1967 Convertible 289, C4 Automatic, Built Nov 30 1966, SJ, DSO75.
Pictures: https://mustang-cabrio-67.jimdo.com/mustang-1967-impressionen

Offline Bob Gaines

  • Global Moderator
  • Hero Member
  • ****
  • Posts: 8952
Re: WTB: Rear bumper guards 1967 incl. rubber pad
« Reply #7 on: August 12, 2017, 02:33:06 PM »
Yes, exactly. But Bob unfortunately is not shipping to GER as far as I know. Or Bob?
And these are 68 if I'm not mistaken (because of the rubber conus). Not sure if 67 had those?
But doesn't matter so much.
Yes ,67 had the cones too but not sure if it was a plant thing or MFG thing. All of the service ones I have seen did not have the hole for the cone bumper. If the hole is there there should be a cone bumper to fill it. I just know that they are typical on 67 (SJ) and 68 (Metuchen) Shelby's. I have seen some on cars that did not have the holes for the cone bumpers but I am not sure if they had been replaced and didn't think enough to correlate the plant information to correlate a pattern. FYI the pair I had are sold.
Bob Gaines,Shelby enthusiast, Shelby collector , Shelby concours judge SAAC,MCA,Mid America Shelby

Offline Ralf

  • Hero Member
  • *****
  • Posts: 656
  • http://mustang-cabrio-67.jimdo.com/
Re: WTB: Rear bumper guards 1967 incl. rubber pad
« Reply #8 on: August 12, 2017, 02:53:03 PM »
Thx Bob.

So, still looking.
1967 Convertible 289, C4 Automatic, Built Nov 30 1966, SJ, DSO75.
Pictures: https://mustang-cabrio-67.jimdo.com/mustang-1967-impressionen