1st Generation 1964 1/2 - 1973 - Questions & general discussions that apply to a specific year > 1966 Shelby

66 Hertz car - final stages. Spacer Plates and PCV

(1/1)

6S1284:
My research tells me my 289 pcv was attached to intake via a fitting on back of intake.  Was there ever any kind of carb spacer?

Any information is once again greatly appreciated.!

Dave Shaffer

Bob Gaines:

--- Quote from: 6S1284 on July 02, 2017, 05:06:17 PM ---My research tells me my 289 pcv was attached to intake via a fitting on back of intake.  Was there ever any kind of carb spacer?

Any information is once again greatly appreciated.!

Dave Shaffer

--- End quote ---
No used . PCV used fitting on intake runner. If you are running the Ford carb as is typical of automatic Hertz cars after #900 ,a thicker fiber gasket was used to compensate for the different size carb base plate compared to the Holley base plate that the intake was designed for. This was to prevent a vacuum leak.

Navigation

[0] Message Index