Author Topic: Boss 302 Engine Detailing  (Read 5922 times)

Offline Anghelrestorations

  • Hero Member
  • *****
  • Posts: 1126
    • Anghel Restorations
Boss 302 Engine Detailing
« on: October 17, 2016, 06:06:59 PM »
Because the size of the file, this may take a minute to load. 
What I put together here is an update to the original article that Bob Perkins wrote in 2000 that was printed in Mustang Monthly and added some new information and photos.  Comments.....let me know.  Big difference for me is seeing all of this in color now. 

http://www.anghelrestorations.com/uploads/3/1/7/6/3176630/boss302_engine_detail_v1.1.pdf


« Last Edit: November 02, 2016, 10:39:51 PM by azscj »
Marcus Anghel
MCA National Gold Card Judge, 69-71 Mustang
SAAC National Head Judge, Boss Mustangs

www.anghelrestorations.com
www.facebook.com/anghelrestorations
www.instagram.com/anghelrestorations

Offline J_Speegle

  • Administrator
  • Hero Member
  • *****
  • Posts: 24173
Re: Boss 302 Engine Detailing
« Reply #1 on: October 18, 2016, 12:01:38 AM »
Great effort and thanks for sharing. PM sent
Jeff Speegle

Anything worth doing is worth doing concours ;)

Offline cobrajet_carl

  • Sr. Member
  • ****
  • Posts: 362
Re: Boss 302 Engine Detailing
« Reply #2 on: May 26, 2020, 02:16:12 PM »
The engine pictured is a 70, but the engine decal is from a 69. Also, one of Jeff's pictures of an original 69 decal shows the timing (and something illegible above the timing) rather than a small C1.
« Last Edit: May 26, 2020, 02:28:21 PM by cobrajet_carl »
Carl
70 and 71 Dearborn mach Is

Offline Anghelrestorations

  • Hero Member
  • *****
  • Posts: 1126
    • Anghel Restorations
Re: Boss 302 Engine Detailing
« Reply #3 on: June 02, 2020, 04:11:16 AM »
Carl....not sure exactly I know what your talking about here.  One of Jeffs pictures?  What Jeff and what pictures? 
Marcus Anghel
MCA National Gold Card Judge, 69-71 Mustang
SAAC National Head Judge, Boss Mustangs

www.anghelrestorations.com
www.facebook.com/anghelrestorations
www.instagram.com/anghelrestorations

Offline cobrajet_carl

  • Sr. Member
  • ****
  • Posts: 362
Re: Boss 302 Engine Detailing
« Reply #4 on: June 03, 2020, 06:46:28 PM »
Carl....not sure exactly I know what your talking about here.  One of Jeffs pictures?  What Jeff and what pictures?
Sorry, the first picture in the paper engine decal thread.
http://www.concoursmustang.com/forum/index.php?topic=7734.0
Carl
70 and 71 Dearborn mach Is

Offline PerkinsRestoration

  • Sr. Member
  • ****
  • Posts: 292
Re: Boss 302 Engine Detailing
« Reply #5 on: June 03, 2020, 10:29:57 PM »
Carl the sticker you reference is a early 80's Jim Osborne creation with incorrect information. The sample he used was from a 69 Boss  429 , thus the L for Lima plant rather than C1 for Cleveland plant.

Offline cobrajet_carl

  • Sr. Member
  • ****
  • Posts: 362
Re: Boss 302 Engine Detailing
« Reply #6 on: June 04, 2020, 12:21:29 AM »
Carl the sticker you reference is a early 80's Jim Osborne creation with incorrect information. The sample he used was from a 69 Boss  429 , thus the L for Lima plant rather than C1 for Cleveland plant.
Doesn't look like an L to me but I can't really make it out. Were Windsor engines assembled in Cleveland and just the parts cast at the Windsor plant?
http://www.concoursmustang.com/forum/gallery/1/6-050114151956-15291646.jpeg

EDIT - I guess you were referring to the decal in Marcus's guide and not the one Jeff describes as original?
« Last Edit: June 04, 2020, 12:29:03 AM by cobrajet_carl »
Carl
70 and 71 Dearborn mach Is

Offline PerkinsRestoration

  • Sr. Member
  • ****
  • Posts: 292
Re: Boss 302 Engine Detailing
« Reply #7 on: June 04, 2020, 11:41:36 AM »
I'm not referring to the one in Marcus's article.

Offline J_Speegle

  • Administrator
  • Hero Member
  • *****
  • Posts: 24173
Re: Boss 302 Engine Detailing
« Reply #8 on: June 04, 2020, 08:03:46 PM »
EDIT - I guess you were referring to the decal in Marcus's guide and not the one Jeff describes as original?

Carl let me offer that the picture was included in the thread about reproducing the engine ID labels and not meant to be a representation of a specific year or model original sticker. If it has I would have likely  included a caption referring it as an original for a specific application. Will try and think about that if and when I do something similar in future postings and will replace it with an original
Jeff Speegle

Anything worth doing is worth doing concours ;)

Offline cobrajet_carl

  • Sr. Member
  • ****
  • Posts: 362
Re: Boss 302 Engine Detailing
« Reply #9 on: June 04, 2020, 08:35:37 PM »
Carl let me offer that the picture was included in the thread about reproducing the engine ID labels and not meant to be a representation of a specific year or model original sticker. If it has I would have likely  included a caption referring it as an original for a specific application. Will try and think about that if and when I do something similar in future postings and will replace it with an original
It sure looks aged enough to be original! Unfortunately my original (I think) decal is not of much use.
Carl
70 and 71 Dearborn mach Is

Offline J_Speegle

  • Administrator
  • Hero Member
  • *****
  • Posts: 24173
Re: Boss 302 Engine Detailing
« Reply #10 on: June 04, 2020, 08:42:30 PM »
It sure looks aged enough to be original! Unfortunately my original (I think) decal is not of much use.

Yes I think we can all agree :) that one in your picture is too far gone for much except for location and maybe size
« Last Edit: June 04, 2020, 08:47:40 PM by J_Speegle »
Jeff Speegle

Anything worth doing is worth doing concours ;)

Offline 0F02G159247

  • Newbie
  • *
  • Posts: 3
Re: Boss 302 Engine Detailing
« Reply #11 on: December 29, 2023, 06:11:29 PM »
Just for posterity's sake, the URL was updated some time ago - https://anghelrestorations.com/wp-content/uploads/2021/08/boss302_engine_detail_v1.1.pdf