ConcoursMustang Forums
1st Generation 1964 1/2 - 1973 - Questions & general discussions that apply to a specific year => 1970 Mustang => Topic started by: 1970 Snake on December 28, 2017, 08:04:33 PM
-
Does anyone know what material is used to cover the trunk wheel tub pinch weld and where to get the material.
-
http://www.concoursmustang.com/forum/index.php?topic=5256.0
Hopefully the black one is right for your car since all the suppliers carry them.
I would think the repros have the little V notch out as original, but easy enough to do yourself if need be.
-
If you need gray luggage protector you might want to check this out.
http://saacforum.com/index.php?topic=42529.0
TOB
-
Thanks guys, mine is a Dearborn car, and assume grey is needed.
Additionally to that end where do I get it and also the white 6" long snap tie for the fuel sending wire?
-
Thanks guys, mine is a Dearborn car, and assume grey is needed.
Doing a survey right now of my pictures for the producers. Most likely yours was the gray version
Additionally to that end where do I get it and also the white 6" long snap tie for the fuel sending wire?
An opaque zip tie of the right size will likely take care fo that for you. Original unused ones are not easy to find when you need one
-
Additionally to that end where do I get it and also the white 6" long snap tie for the fuel sending wire?
Is this the one on page 175 part numbers B-10981 or 351053-S?
The thing to do is check the Ford number against that shown for the zip tie in your assembly manual.
If it's not an exact match there's no point, just use a generic one like Jeff suggested.
http://amkproducts.com/Catalog_PDF/165-176.pdf
-
Is this the one on page 175 part numbers B-10981 or 351053-S?
B-10981 is the closest IMHO to the originals from what I'm measuring if that helps
Its the same style (releasable) also
-
that white ty strap amk has is the correct panduit type as ford used them in several places & if u want an original grey strip we have a couple left on our ebay store or u can wait as the new correct repo grey strip will be on the market shortly.
-
I would like to get a new grey strip, can you please advise when and how to get it.
I have ordered the white/clear snap ties from AMK.
Thanks
-
I would like to get a new grey strip, can you please advise when and how to get it....
I suggest that you drop Ed a PM. Just click on "specialed" next to his post then choose "Send PM" under his screen name on the left side of the window
To others who might find this thread in a search about the subject here is another thread that might be helpful
http://www.concoursmustang.com/forum/index.php?topic=17161.0 (http://www.concoursmustang.com/forum/index.php?topic=17161.0)
-
Hi all. my first post here ,been a member for a while. My dearborn (oct 69 built) 70 boss 302 has 1 black cover on drivers side ,should there be one on the pass side been covered by the spare space saver. thanks trev.
-
........................My dearborn (oct 69 built) 70 boss 302 has 1 black cover on drivers side ,should there be one on the pass side been covered by the spare space saver. thanks trev.
No
-
ok thanks