« previous next »
Pages: [1]   Go Down

Author Topic: kick panel screws  (Read 1356 times)

Offline dbm350

  • Jr. Member
  • **
  • Posts: 63
kick panel screws
« on: July 19, 2010, 12:42:05 AM »
      Working on an April 66 San Hose car.   I need confirmation on number of screws in the kick panel and the location.  There are 3  screw holes in the area underneath the panels. I thought there were only supposed to be 2 at this time in production.   I have 1 hole the lower front corner, 1 hole about half way up from the floor and about 2 inches in from the door opening. And 1hole about 3/4 up from the floor and about 3-4 inches in from the door opening. Same on both sides. Any body else seen this?    Thanks Doug
Logged

Offline NEFaurora

  • Hero Member
  • *****
  • Posts: 970
Re: kick panel screws
« Reply #1 on: July 19, 2010, 01:03:30 AM »

Very early production '66's had the 3 screw Kick panels which were a '65 carryover.  Since it is a San Jose car, Jeff Speegle will probably respond since he is the San Jose expert, or you can PM him or e-mail him.

Tony K.

Logged
Tony Kovar (NEFaurora@aol.com)
1965 Mustang Convertible 200 cid 3spd manual
1966 Mustang Convertible Sprint 200 C4 Auto
2007 Mustang Convertible V6 Auto with "Pony Package".
1966 Mustang Sprint 200 Registry Owner/Moderator
MCA#70001

Offline J_Speegle

  • Administrator
  • Hero Member
  • *****
  • Posts: 24218
Re: kick panel screws
« Reply #2 on: July 19, 2010, 07:37:04 PM »
Hope this helps - what I'm seeing on a spring 66 San Jose cars





« Last Edit: February 16, 2020, 02:04:59 AM by J_Speegle »
Logged
Jeff Speegle

Anything worth doing is worth doing concours ;)

Offline dbm350

  • Jr. Member
  • **
  • Posts: 63
Re: kick panel screws
« Reply #3 on: July 19, 2010, 11:25:11 PM »
  Thank you Tony and Jeff. Exactlywhat I needed to Know.   Doug
Logged
Pages: [1]   Go Up
« previous next »