« previous next »
Pages: [1]   Go Down

Author Topic: 1967 390 crank pulley  (Read 1831 times)

Offline dan green

  • Full Member
  • ***
  • Posts: 127
1967 390 crank pulley
« on: July 24, 2010, 03:26:29 PM »
What is the correct part number for the crank shaft pulley on a 1967 s code 390?
car is san jose sep 66 built with power steering and smog.

C6.......?
Logged

Offline T Lea

  • Global Moderator
  • Full Member
  • ****
  • Posts: 188
Re: 1967 390 crank pulley
« Reply #1 on: July 26, 2010, 09:32:39 AM »
Dan, I'm thinking its one of the C1 cast pulleys, how many sheaves?
Logged

Offline midlife

  • Wiring Guru---let me check your shorts!
  • Global Moderator
  • Hero Member
  • ****
  • Posts: 2158
    • Midlife Harness Restorations
Re: 1967 390 crank pulley
« Reply #2 on: July 26, 2010, 10:28:13 PM »
According to my documentation, a 390GT with emissions, AC, PS, and X-cooling is C1AZ-6A312-C.  It's the same pulley as a 390GT with PS and emissions.  1 belt, outer pulley.
Logged
Midlife Harness Restorations - http://midlifeharness.com

Offline dan green

  • Full Member
  • ***
  • Posts: 127
Re: 1967 390 crank pulley
« Reply #3 on: July 27, 2010, 11:23:46 AM »
I'll look at the one I have (C8 part # I believe, so definately wrong).  All of the other pulleys on the car had correct (c7 or before part #'s) pulleys.
Logged

Offline dan green

  • Full Member
  • ***
  • Posts: 127
Re: 1967 390 crank pulley
« Reply #4 on: July 27, 2010, 03:02:16 PM »
The part number on the crank pulley I have is c8ae-6312-e (2 sheave).

I couldn't find a part number on the water pump pulley (i believe it is correct), 3 sheave.
Logged
Pages: [1]   Go Up
« previous next »