Author Topic: Ps boot clamps  (Read 3502 times)

Offline 68 S Code

  • Hero Member
  • *****
  • Posts: 1084
Ps boot clamps
« on: November 14, 2010, 10:03:27 AM »
I am detailing the PS cylinder with a new boot at the stud end and a new accordion boot at the PS valve assembly. These boots are held on with a metal ring which uses a special tool to crimp it. The tool is available but where do you get the large ring for the cylinder boot. I heard many just use a plastic zip tie instead. I would rather find a ring. But where, NPd, amk?

Offline CharlesTurner

  • Charles Turner
  • Administrator
  • Hero Member
  • *****
  • Posts: 7619
Re: Ps boot clamps
« Reply #1 on: November 14, 2010, 01:02:53 PM »
I'm pretty sure the large clamp comes in the end boot kit, which is available in reproduction from most any mustang parts place.
Charles Turner - MCA/SAAC Judge
Concours Mustang Forum Admin

Offline Bob Gaines

  • Global Moderator
  • Hero Member
  • ****
  • Posts: 8982
Re: Ps boot clamps
« Reply #2 on: November 14, 2010, 01:24:20 PM »
I'm pretty sure the large clamp comes in the end boot kit, which is available in reproduction from most any mustang parts place.
The same type of crimp clamp is also used on the power booster vacuum supply line . This info may also help source it. Check Mansfield Mustang I believe he may sell them individually . Bob
Bob Gaines,Shelby enthusiast, Shelby collector , Shelby concours judge SAAC,MCA,Mid America Shelby

Offline carlite65

  • Global Moderator
  • Hero Member
  • ****
  • Posts: 2366
Re: Ps boot clamps
« Reply #3 on: November 14, 2010, 01:49:04 PM »
virginia mustang has it under p/n PE609.
5F09C331248

Offline 68 S Code

  • Hero Member
  • *****
  • Posts: 1084
Re: Ps boot clamps
« Reply #4 on: November 14, 2010, 11:35:36 PM »
Thanks guys for the lead. I bought the end boot and it didn't come with the crimp clamp.

Offline 68 S Code

  • Hero Member
  • *****
  • Posts: 1084
Re: Ps boot clamps
« Reply #5 on: November 15, 2010, 10:16:23 PM »
Did some curving of the retailers mentioned and they had them. Thanks again guys.

Offline T Lea

  • Global Moderator
  • Full Member
  • ****
  • Posts: 188
Re: Ps boot clamps
« Reply #6 on: November 15, 2010, 10:44:19 PM »
On a related question, what are people opinions on yellow clamps on the large boot, ever seen them?

Offline gtamustang

  • CPM
  • Global Moderator
  • Sr. Member
  • ****
  • Posts: 294
Re: Ps boot clamps
« Reply #7 on: November 16, 2010, 04:17:00 PM »
Are you refering to the stud end bood or the ram boot? Either way I have not seen any yellow band clamps on the boots. I wonder what the reasoning would be for a different color clamp.

Regards,
Pete Morgan

Offline 68 S Code

  • Hero Member
  • *****
  • Posts: 1084
Re: Ps boot clamps
« Reply #8 on: November 16, 2010, 10:38:44 PM »
Yellow meaning zinc di-chromate? One other question. The accordion boot on the steering valve assembly isn't held on in any way at the bigger diameter end? I know there is a crimp clamp at the small end.

Offline T Lea

  • Global Moderator
  • Full Member
  • ****
  • Posts: 188
Re: Ps boot clamps
« Reply #9 on: November 16, 2010, 11:05:44 PM »
Are you refering to the stud end bood or the ram boot? Either way I have not seen any yellow band clamps on the boots. I wonder what the reasoning would be for a different color clamp.

Regards,
Pete Morgan
The stud end boot. have seen a couple yellow ones, not zinc dicromate but yellow. Have no idea what thats about.

Offline Bob Gaines

  • Global Moderator
  • Hero Member
  • ****
  • Posts: 8982
Re: Ps boot clamps
« Reply #10 on: November 17, 2010, 12:33:20 AM »
I have mostly seen white. it was as if painted . Reminants remained under the band when taking off the boot. Bob
Bob Gaines,Shelby enthusiast, Shelby collector , Shelby concours judge SAAC,MCA,Mid America Shelby

Offline T Lea

  • Global Moderator
  • Full Member
  • ****
  • Posts: 188
Re: Ps boot clamps
« Reply #11 on: November 17, 2010, 08:57:36 AM »
Could be a white that appeared yellowish from age

Offline J_Speegle

  • Administrator
  • Hero Member
  • *****
  • Posts: 24216
Re: Ps boot clamps
« Reply #12 on: November 17, 2010, 11:54:57 PM »
On a related question, what are people opinions on yellow clamps on the large boot, ever seen them?

Have not seen a yellow one as of yet - any year
Jeff Speegle

Anything worth doing is worth doing concours ;)