Author Topic: 1969 f code san jose bracket  (Read 1074 times)

Offline m.b.spuur

  • Jr. Member
  • **
  • Posts: 68
1969 f code san jose bracket
« on: February 16, 2017, 05:13:53 PM »
hello is there some one there know what the concours finish is for the brackets too the power pump and the alternator  :)

1969 f code coupe san jose

Offline J_Speegle

  • Administrator
  • Hero Member
  • *****
  • Posts: 14384
Re: 1969 f code san jose bracket
« Reply #1 on: February 16, 2017, 06:59:37 PM »
hello is there some one there know what the concours finish is for the brackets too the power pump and the alternator  :)

#1-#3 semi-gloss black (#3 isn't for your car but I guess your just using the picture to illustrate the alternator bracket. The others can be sure from the picture





#4 isn't the correct bracket for your year or application - yours should be aluminum and it was just bare metal




« Last Edit: February 16, 2017, 07:10:13 PM by J_Speegle »
Jeff Speegle

Anything worth doing is worth doing concours ;)

Offline m.b.spuur

  • Jr. Member
  • **
  • Posts: 68
Re: 1969 f code san jose bracket
« Reply #2 on: February 17, 2017, 04:47:06 AM »
4 my ones there was siding On my car was just bare metal. I have a post 2 pictures, and the the 2 picture is that bracket there have Been siding On my engine

Offline J_Speegle

  • Administrator
  • Hero Member
  • *****
  • Posts: 14384
Re: 1969 f code san jose bracket
« Reply #3 on: February 17, 2017, 05:21:06 AM »
4 my ones there was siding On my car was just bare metal. I have a post 2 pictures, and the the 2 picture is that bracket there have Been siding On my engine

A question if you don't mind

Is your car a San Jose car?  Both your brackets appear to be from a 70 engine rather than a 69 302 2V

Noticed that the lower picture - the alternator bracket has a DO part number - likely not an original for a 69 302 ;) Shaped differently also
« Last Edit: February 17, 2017, 05:27:46 AM by J_Speegle »
Jeff Speegle

Anything worth doing is worth doing concours ;)

Offline m.b.spuur

  • Jr. Member
  • **
  • Posts: 68
Re: 1969 f code san jose bracket
« Reply #4 on: February 17, 2017, 11:09:41 AM »
I Think This engine there was in my car Is NOT the original one. Butt the block is from 1969
Butt was it normaly the bracket assy,p/S pump MTG was in aluminium On 1969 San Josť cars




Number 1 picture there is No number in it
Number 2 picture is Doaa-3c511-G
Number 3 picture is dooe 10156-a
Number 4 picture is dooe -10145-a

Offline J_Speegle

  • Administrator
  • Hero Member
  • *****
  • Posts: 14384
Re: 1969 f code san jose bracket
« Reply #5 on: February 17, 2017, 07:03:17 PM »
I Think This engine there was in my car Is NOT the original one. But the block is from 1969

Guess your reporting that the engine was cast in 69. As a general statement - almost half of all engines installed in 1970 Mustangs would have been cast in 1969. Did you look for a VIN stamped on the block? If complete it would provide the year the engine was originally installed in



Butt was it normally the bracket assy,p/S pump MTG was in aluminium On 1969 San Josť cars

Looks like someone used pieces and parts from other applications and years to make things fit and work in your case or that the engine and all accessories are from another (1970 in this case) car

Did double check and found another dozen examples of 69 F codes with the aluminum PS cradle and the alternator bracket the window for the heater hose clamp formed in it

« Last Edit: February 17, 2017, 07:07:27 PM by J_Speegle »
Jeff Speegle

Anything worth doing is worth doing concours ;)

Offline jwc66k

  • Hero Member
  • *****
  • Posts: 3577
Re: 1969 f code san jose bracket
« Reply #6 on: February 17, 2017, 08:09:11 PM »
Guess your reporting that the engine was cast in 69. As a general statement - almost half of all engines installed in 1970 Mustangs would have been cast in 1969. Did you look for a VIN stamped on the block? If complete it would provide the year the engine was originally installed in
Does a 69-70 302 have the same assembly date code stamped near the distributor as a 65-66 289?
Jim
I promise to be politically correct in all my posts to keep the BBBB from vociferating.

Offline J_Speegle

  • Administrator
  • Hero Member
  • *****
  • Posts: 14384
Re: 1969 f code san jose bracket
« Reply #7 on: February 17, 2017, 11:54:09 PM »
Does a 69-70 302 have the same assembly date code stamped near the distributor as a 65-66 289?
Jim

Yes and yes it would help confirm it even more
Jeff Speegle

Anything worth doing is worth doing concours ;)

Offline m.b.spuur

  • Jr. Member
  • **
  • Posts: 68
Re: 1969 f code san jose bracket
« Reply #8 on: February 18, 2017, 07:57:27 AM »
I have the engine number here 😊

Offline Bob Gaines

  • Global Moderator
  • Hero Member
  • ****
  • Posts: 4251
Re: 1969 f code san jose bracket
« Reply #9 on: February 18, 2017, 02:12:07 PM »
I have the engine number here 😊
9M24  Dec 24 69 (a Christmas present from Ford) indicates the engine was cast after 69 production was over and 70 production was in full swing.
« Last Edit: February 18, 2017, 02:14:18 PM by Bob Gaines »
Bob Gaines,Shelby enthusiast, Shelby collector , Shelby concours judge SAAC,MCA,Mid America Shelby

Offline m.b.spuur

  • Jr. Member
  • **
  • Posts: 68
Re: 1969 f code san jose bracket
« Reply #10 on: February 18, 2017, 07:02:17 PM »
soo some one has been change the engine and replace it with one from a 1970 car :(

Offline J_Speegle

  • Administrator
  • Hero Member
  • *****
  • Posts: 14384
Re: 1969 f code san jose bracket
« Reply #11 on: February 18, 2017, 07:50:18 PM »
soo some one has been change the engine and replace it with one from a 1970 car :(

Yep  ::)
Jeff Speegle

Anything worth doing is worth doing concours ;)

Offline m.b.spuur

  • Jr. Member
  • **
  • Posts: 68
Re: 1969 f code san jose bracket
« Reply #12 on: February 19, 2017, 02:29:11 PM »
wich power steering pump was normaly install in 1969 f code coupe san jose


and what shut the finish be on this bracket on the picture