Author Topic: Do I have the correct trunk lid ?  (Read 1073 times)

Offline C7Z

  • Newbie
  • *
  • Posts: 19
Do I have the correct trunk lid ?
« on: March 05, 2017, 12:11:27 PM »
1965 2+2, 19A build date, San Jose car

Is this the correct trunk lid ?  I've been told it isn't but I have seen a lot of conflicting information.

Thanks !
« Last Edit: March 05, 2017, 12:26:05 PM by C7Z »
-D Payne

Offline Brian Conway

  • Hero Member
  • *****
  • Posts: 1623
Re: Do I have the correct trunk lid ?
« Reply #1 on: March 05, 2017, 12:17:56 PM »
My lid has a date stamp.   Seems yours has one to ?  Brian
5RO9A GT  4 Spd Built 5/29/65
9TO2R SCJ 4 Spd Built 9/19/68
Owner Driver Mechanic
San Diego, Ca.

Offline C7Z

  • Newbie
  • *
  • Posts: 19
Re: Do I have the correct trunk lid ?
« Reply #2 on: March 05, 2017, 12:23:57 PM »
My lid has a date stamp.   Seems yours has one to ?  Brian
It has 3 layers of paint and until I strip them off I can't read the date stamping. 

I was going more by the style of the trunk lid because I know some have the circles and some don't and I'm not sure what the other variations are. 

I know it's not the original trunk lid because the original owner told me that it was stolen along with the trap door many years ago.

Thanks !
-D Payne

Offline ChrisV289

  • Hero Member
  • *****
  • Posts: 1956
Re: Do I have the correct trunk lid ?
« Reply #3 on: March 05, 2017, 12:26:20 PM »
Looks correct to me including the wire harness clip on the left hand side holding the tension rod.
Chris
1965 Honey Gold Fastback (SJ 10/29/64)
1965 Caspian Blue Fastback (SJ 06/03/65)
2009 V6 Mustang Coupe

Offline CharlesTurner

  • Charles Turner
  • Administrator
  • Hero Member
  • *****
  • Posts: 7619
Re: Do I have the correct trunk lid ?
« Reply #4 on: March 05, 2017, 12:31:56 PM »
The circles started sometime in '66 production.
Charles Turner - MCA/SAAC Judge
Concours Mustang Forum Admin

Offline jwc66k

  • Hero Member
  • *****
  • Posts: 7123
Re: Do I have the correct trunk lid ?
« Reply #5 on: March 05, 2017, 02:15:07 PM »
Looks correct to me including the wire harness clip on the left hand side holding the tension rod.
Yes.
Jim
I promise to be politically correct in all my posts to keep the BBBB from vociferating.

Offline 65Ford

  • Jr. Member
  • **
  • Posts: 77
Re: Do I have the correct trunk lid ?
« Reply #6 on: March 05, 2017, 02:36:35 PM »
I  had a February '65 scheduled build fastback with that style trunk lid.
63A  R  28  02K  51  1  5
5R09A142

Offline J_Speegle

  • Administrator
  • Hero Member
  • *****
  • Posts: 24209
Re: Do I have the correct trunk lid ?
« Reply #7 on: March 05, 2017, 06:48:11 PM »
1965 2+2, 19A build date, San Jose car

Yes it appears to be correct visually for a 65 San Jose installation

Date code would give you an idea if it came from another car

Got something like a 10 or 11 to start the date code with ?
Jeff Speegle

Anything worth doing is worth doing concours ;)