ConcoursMustang Forums

Marketplace => Wanted Ads => Topic started by: HDAshmore on July 03, 2017, 08:58:34 PM

Title: WTB 70 B2 valve cover bolts, 69 B2 Valve covers, spark plug wires,
Post by: HDAshmore on July 03, 2017, 08:58:34 PM
Still looking for:

1970 Boss 302 Valve cover Bolts
OEM restorable 1969 Boss 302 chrome steel valve covers (not the same as 351C)
OEM or NOS set of Auto lite plug wires dated (4 Q 69) or (1 Q 70)  must be the 7mm radio resistance set.  Not looking for repops on these
NOS 1970 Mustang Fuel Sending unit. (Found)

Please PM me if you have or know where any of these can be found for sale. 

Thanks,
Dan
Title: Re: Wanted Boss 302, 351 or 428 CJ Valve cover bolts
Post by: Bob Gaines on July 03, 2017, 11:35:44 PM
Quote from: HDAshmore on July 03, 2017, 08:58:34 PM
Good evening,

Need a set of 1970 Boss 302 aluminum valve cover bolts.  I have heard that Boss 351 and 428 CJ bolts are the same and have the correct markings.  Looking for OEM only.  As long as they can be used and restored that is my only criteria.  Partial or full set is okay.

Thanks,
Dan
A couple different possibilities on the bolt markings so you may want to narrow it down. You might want to post what maker marking on the bolt heads you are looking for. 
Title: Re: Wanted Boss 302, 351 or 428 CJ Valve cover bolts
Post by: HDAshmore on July 04, 2017, 12:02:56 AM
Bob,

Thanks for the tip.  I attached a pic of the markings.  I need the ones that have the washer on them and are a little longer because they are for cast alloy Boss 302 valve covers.

Thanks,
Dan
Title: Re: Wanted Boss 302, 351 or 428 CJ Valve cover bolts
Post by: HDAshmore on July 04, 2017, 12:09:15 AM
These are not for me I am trying to help a buddy find a set.
Title: Re: Wanted Boss 302, 351 or 428 CJ Valve cover bolts
Post by: BlackMcode1970mach1 on July 06, 2017, 09:11:11 PM
I need a set for my Cleveland as I'm putting these kind of valve covers on my car.  amk make these?? I just want the right bolts for the job. Mark
Title: Re: Wanted Boss 302, 351 or 428 CJ Valve cover bolts
Post by: HDAshmore on August 06, 2017, 12:45:46 AM
Still looking for:

1970 Boss 302 Valve cover Bolts
OEM restorable 1969 Boss 302 chrome steel valve covers (not the same as 351C)
OEM or NOS set of Auto lite plug wires dated (4 Q 69) or (1 Q 70)  must be the 7mm radio resistance set.  Not looking for repops on these
NOS 1970 Mustang Fuel Sending unit.

Please PM me if you have or know where any of these can be found for sale. 

Thanks,
Dan
Title: Re: WTB 70 B2 valve cover bolts, 69 B2 Valve covers, spark plug wires,
Post by: HDAshmore on September 08, 2017, 04:20:12 PM
updated list still looking for what is on there

v/r
Dan