Author Topic: Taillight panel edge  (Read 3685 times)

Offline 13Outlaw

  • Full Member
  • ***
  • Posts: 123
Taillight panel edge
« on: March 12, 2016, 09:02:43 PM »
I need help with a question, replaced my taillight panel and already got rid of the old one. Can someone verify for me that the lip in the picture I posted gets cut off? Thanks in advance!
1969 Mach 1 R-Code 4-Speed (Dearborn built Jan 69)
1992 GT 5.0 5-Speed
2003 Cobra
2013 Shelby GT500

Offline 69GT350H

  • Hero Member
  • *****
  • Posts: 683
  • 1 of 10 Hertz Rentals from Miami Int Airport
    • RedsHost is my private forum and photo gallery site
Re: Taillight panel edge
« Reply #1 on: March 12, 2016, 11:05:39 PM »
I've got the same issue. Been told to bend it under 180 deg.
Accurate looking but not a Concours Restoration/build. See my build photo gallery at 69GT350 Hertz Build

Offline 13Outlaw

  • Full Member
  • ***
  • Posts: 123
Re: Taillight panel edge
« Reply #2 on: March 12, 2016, 11:15:22 PM »
Thanks! That crossed my mind as well, I'll plan on that, thanks again!
1969 Mach 1 R-Code 4-Speed (Dearborn built Jan 69)
1992 GT 5.0 5-Speed
2003 Cobra
2013 Shelby GT500

Offline 69GT350H

  • Hero Member
  • *****
  • Posts: 683
  • 1 of 10 Hertz Rentals from Miami Int Airport
    • RedsHost is my private forum and photo gallery site
Re: Taillight panel edge
« Reply #3 on: March 13, 2016, 12:02:54 AM »
Accurate looking but not a Concours Restoration/build. See my build photo gallery at 69GT350 Hertz Build

Offline 13Outlaw

  • Full Member
  • ***
  • Posts: 123
Re: Taillight panel edge
« Reply #4 on: March 13, 2016, 12:09:15 AM »
Awesome, thanks!
1969 Mach 1 R-Code 4-Speed (Dearborn built Jan 69)
1992 GT 5.0 5-Speed
2003 Cobra
2013 Shelby GT500

Offline 13Outlaw

  • Full Member
  • ***
  • Posts: 123
Re: Taillight panel edge
« Reply #5 on: March 13, 2016, 12:12:15 AM »
Man, once again thanks!! And once again, Jeff to the rescue!!  That's just what I have been searching to find!
1969 Mach 1 R-Code 4-Speed (Dearborn built Jan 69)
1992 GT 5.0 5-Speed
2003 Cobra
2013 Shelby GT500

Offline 13Outlaw

  • Full Member
  • ***
  • Posts: 123
Re: Taillight panel edge
« Reply #6 on: March 13, 2016, 03:00:35 AM »
I just found one of my pictures from my original taillight panel and it looks like it is a 90 degree bend. Check out the picture.
1969 Mach 1 R-Code 4-Speed (Dearborn built Jan 69)
1992 GT 5.0 5-Speed
2003 Cobra
2013 Shelby GT500

Offline 69GT350H

  • Hero Member
  • *****
  • Posts: 683
  • 1 of 10 Hertz Rentals from Miami Int Airport
    • RedsHost is my private forum and photo gallery site
Re: Taillight panel edge
« Reply #7 on: March 13, 2016, 12:17:10 PM »
Wish my body guy had saved mine so I could see how it was originally. I just do not remember a sharp edge like that, but that may be the way it was? I've got the metal, I'm going to use a pair of welding pliers and a butane torch and slowly roll it 180 deg if I can. Helps that I just cut the center of the tail light panel out for the Shelby tail light panel.
Accurate looking but not a Concours Restoration/build. See my build photo gallery at 69GT350 Hertz Build

Offline WT8095

  • Hero Member
  • *****
  • Posts: 940
  • Dave Z.
Re: Taillight panel edge
« Reply #8 on: March 13, 2016, 03:00:20 PM »
azscj posted this photo of a '70 in an earlier discussion:

http://www.concoursmustang.com/forum/index.php?topic=5714.msg32062#msg32062
Dave Z.

'68 fastback, S-code + C6. Special Paint (Rainbow promotion), DSO 710784. Actual build date 2/7/1968, San Jose.
'69 Cougar convertible, 351W-2V + FMX, Meadowlark Yellow.

Offline 69GT350H

  • Hero Member
  • *****
  • Posts: 683
  • 1 of 10 Hertz Rentals from Miami Int Airport
    • RedsHost is my private forum and photo gallery site
Re: Taillight panel edge
« Reply #9 on: March 13, 2016, 04:00:17 PM »
azscj posted this photo of a '70 in an earlier discussion:

http://www.concoursmustang.com/forum/index.php?topic=5714.msg32062#msg32062
I cant tell from the photo, is it an edge, or does it make a 90 and go under?
Accurate looking but not a Concours Restoration/build. See my build photo gallery at 69GT350 Hertz Build

Offline J_Speegle

  • Administrator
  • Hero Member
  • *****
  • Posts: 24177
Re: Taillight panel edge
« Reply #10 on: March 13, 2016, 06:58:15 PM »
More examples








Jeff Speegle

Anything worth doing is worth doing concours ;)

Offline 13Outlaw

  • Full Member
  • ***
  • Posts: 123
Re: Taillight panel edge
« Reply #11 on: March 13, 2016, 07:35:22 PM »
Yep it makes a 90 thanks guys, I'm slowly body dolling my back smoth after bending it.
1969 Mach 1 R-Code 4-Speed (Dearborn built Jan 69)
1992 GT 5.0 5-Speed
2003 Cobra
2013 Shelby GT500

Offline WT8095

  • Hero Member
  • *****
  • Posts: 940
  • Dave Z.
Re: Taillight panel edge
« Reply #12 on: March 13, 2016, 10:51:32 PM »
I cant tell from the photo, is it an edge, or does it make a 90 and go under?

I believe it just goes down and ends with a sheared edge.
Dave Z.

'68 fastback, S-code + C6. Special Paint (Rainbow promotion), DSO 710784. Actual build date 2/7/1968, San Jose.
'69 Cougar convertible, 351W-2V + FMX, Meadowlark Yellow.

Offline 69GT350H

  • Hero Member
  • *****
  • Posts: 683
  • 1 of 10 Hertz Rentals from Miami Int Airport
    • RedsHost is my private forum and photo gallery site
Re: Taillight panel edge
« Reply #13 on: March 13, 2016, 11:07:38 PM »
I believe it just goes down and ends with a sheared edge.
My plan has always been to roll it under, dont like the idea of a sharp edge right there. As 13Outlaw and I have the extra metal (if its not supposed to be there), we are either going to make it proper, or improve on it.
Accurate looking but not a Concours Restoration/build. See my build photo gallery at 69GT350 Hertz Build

Offline tobkob

  • Sr. Member
  • ****
  • Posts: 471
Re: Taillight panel edge
« Reply #14 on: March 13, 2016, 11:18:23 PM »
Quote
Helps that I just cut the center of the tail light panel out for the Shelby tail light panel.

Here's a pic of cut out panel on 2060.

TOB
1969 (04/07/69) GT350 owned since 1970. Only owner since Hertz.