Author Topic: Original 5.0 driveshaft  (Read 2163 times)

Offline 91saleen26

  • Newbie
  • *
  • Posts: 9
Original 5.0 driveshaft
« on: March 18, 2018, 11:51:05 AM »
Does anyone have a picture of an original driveshaft fora 1990 Mustang 5.0. Or know the correct color markings.

Offline KevinK

  • Hero Member
  • *****
  • Posts: 532
Re: Original 5.0 driveshaft
« Reply #1 on: March 18, 2018, 09:28:44 PM »
There is not much in the way of markings on the Foxbodies that I know of. There is a yellow paint spray squirt marking the side for balancing.
MCA #33800, Gold Card 3rd Gen
BAMA Member
67 Coupe, 69 Coupe, 74 Coupe, 84 SVO, 84 GT Turbo, 86 GT, 88 McLaren, 89 LX Sport, 03 Mach 1, 07 GT500, 14 GT/CS

Offline bluemax

  • Full Member
  • ***
  • Posts: 109
Re: Original 5.0 driveshaft
« Reply #2 on: March 25, 2018, 09:06:21 AM »
I can not speak for 1990, but as for all Foxbodies... here is a pic of the underside of an '85.5 SVO.

Please note there are several painted stripes. As Kevin stated, there is a yellow spray mark at the rear end also.

Offline 91saleen26

  • Newbie
  • *
  • Posts: 9
Re: Original 5.0 driveshaft
« Reply #3 on: March 26, 2018, 10:52:58 PM »
Thanks blue max. That Scott is mint.

Offline FoxChassis

  • Newbie
  • *
  • Posts: 16
    • 1979-93 Capri and Mustang Decoders
Re: Original 5.0 driveshaft
« Reply #4 on: April 03, 2018, 01:48:27 PM »
Front stabilizer bar, driveshaft, and rear stabilizer bar (if applicable) all had paint daubs or stripes on them.  Color codes are on the build sheet.  I have quite a few four eyed build sheets and plenty of codes but almost nothing for aero cars.