ConcoursMustang Forums

Restoring - General discussions that span across many different groups of years and models => Interior & Trunk => Topic started by: thumphries on September 19, 2016, 03:38:09 PM

Title: 1968-1969 wood grain shift knob
Post by: thumphries on September 19, 2016, 03:38:09 PM
This is obviously a picture of a 1968-1969 wood grain, 4-speed shift knob. There was also a solid black shift knob with white numbers. Is the wood grain shift knob correct for cars equipped with the deluxe wood grain interior? I've seen them on standard interior cars too, but I assume those are just incorrect.

Title: Re: 1968-1969 wood grain shift knob
Post by: Bob Gaines on September 19, 2016, 03:50:05 PM
This is obviously a picture of a 1968-1969 wood grain, 4-speed shift knob. There was also a solid black shift knob with white numbers. Is the wood grain shift knob correct for cars equipped with the deluxe wood grain interior? I've seen them on standard interior cars too, but I assume those are just incorrect.
Typically deluxe interior.  Flat top "3" more correct.
Title: Re: 1968-1969 wood grain shift knob
Post by: thumphries on September 19, 2016, 04:02:25 PM
Thank you.

Does "typically" mean it was inconsistent from the factories? 
Title: Re: 1968-1969 wood grain shift knob
Post by: J_Speegle on September 19, 2016, 04:57:10 PM
Thank you.

Does "typically" mean it was inconsistent from the factories?

Normally no. It's just our (well many of us) way of saying that we believe that is the way they were suppose to be built and believe the vast majority were built and not have to fight those "you can't say always or never" discussions ;) Even though we would love to use those terms at times

If there is a inconsistency that is trackable (trends, change in supplier or practice.........) we try and include that or state that, but if an owner or restorer has nothing historical to base a difference choice on they are better served IMHO to go with the "typical" or "normal" common practice  :)
Title: Re: 1968-1969 wood grain shift knob
Post by: thumphries on September 19, 2016, 05:47:37 PM
Okay Sir,

Understood, thank you very much for the education and the clarification.

This shift knob is kind of an interesting piece, I like the efforts by Ford to match the wood grain interiors, but the le mans stripe looking design on its face is a little curious. It seems like it would be more appropriate on Shelbys that came with the overhead stripes as opposed to normal Mustangs and GTs which never did. Does anyone know why they chose this design over the standard black shift knob?
Title: Re: 1968-1969 wood grain shift knob
Post by: J_Speegle on September 19, 2016, 05:56:57 PM
This shift knob is kind of an interesting piece, I like the efforts by Ford to match the wood grain interiors, but the le mans stripe looking design on its face is a little curious. It seems like it would be more appropriate on Shelby's that came with the overhead stripes as opposed to normal Mustangs and GTs which never did. Does anyone know why they chose this design over the standard black shift knob?

Just for clarity 67-up Shelby's didn't receive Lemans stripes from the factory and they are two wide stripes rather than the "rally" type stripes (more like the rocker stripes used on 65-67 & 69 GT, some GT40's and 65-68 Shelby's)  that is depicted on the shifter knob in the discussion.

Why Ford designers choose this is anyone's guess. Would guess it was the influence of the pop culture and what was going on in that world at the time or just reusing a design that they may have already copywrote and was familiar to Mustang owners
Title: Re: 1968-1969 wood grain shift knob
Post by: Bob Gaines on September 19, 2016, 06:23:40 PM
Okay Sir,

Understood, thank you very much for the education and the clarification.

This shift knob is kind of an interesting piece, I like the efforts by Ford to match the wood grain interiors, but the le mans stripe looking design on its face is a little curious. It seems like it would be more appropriate on Shelbys that came with the overhead stripes as opposed to normal Mustangs and GTs which never did. Does anyone know why they chose this design over the standard black shift knob?
As Jeff mentioned only the 65 and 66 Shelby's came with the over the top stripe and then it was a option . Only about 45%of the 65 Gt350's got them at the factory and less in 66. 67,68 or 69/70 Shelby production did NOT come with over the top stripes nor was it a option. A likely association if not for the pesky facts. I am not sure why Ford chose the rally stripe on the knob. I not sure if it is pertinent but the blue rally stripe historically represented the USA.   Maybe others have more info.
Title: Re: 1968-1969 wood grain shift knob
Post by: Brian Conway on September 20, 2016, 12:44:22 PM
Okay Sir,

Understood, thank you very much for the education and the clarification.

This shift knob is kind of an interesting piece, I like the efforts by Ford to match the wood grain interiors, but the le mans stripe looking design on its face is a little curious. It seems like it would be more appropriate on Shelbys that came with the overhead stripes as opposed to normal Mustangs and GTs which never did. Does anyone know why they chose this design over the standard black shift knob?

Well I guess you had to be there but in this time frame everything got rally stripes.  Jackets, T shirts, hats, cars and surfboards.  Logical reasoning did not enter the picture.  Brian
Title: Re: 1968-1969 wood grain shift knob
Post by: lancelot66 on September 20, 2016, 01:59:59 PM
And lest we not forget the groovy, far out skateboards at the time (remember these before the Le Mans stripes on the Shelby's - had my priorities dialed in at the time)....
Title: Re: 1968-1969 wood grain shift knob
Post by: thumphries on September 22, 2016, 08:43:31 PM
Good points all, thanks for humoring me on the "why" this design was selected.

As I look at it more closely it's clear you guys are right, there are actually three stripes and it's obviously a rocker stripe not a Le Mans stripe.

For the record I'm tracking the '69/'70 Shelby's didn't have Le Mans stripes, I was picturing the striped shift knob being at home in a '68 Shelby with overhead stripes.

Anyway, whatever reason the designers at Ford chose it, I'm a fan, I like that it matches the wood grain interior and it's just more interesting than the black shift ball.
Title: Re: 1968-1969 wood grain shift knob
Post by: Bob Gaines on September 22, 2016, 09:15:59 PM
Good points all, thanks for humoring me on the "why" this design was selected.

As I look at it more closely it's clear you guys are right, there are actually three stripes and it's obviously a rocker stripe not a Le Mans stripe.

For the record I'm tracking the '69/'70 Shelby's didn't have Le Mans stripes, I was picturing the striped shift knob being at home in a '68 Shelby with overhead stripes.

Anyway, whatever reason the designers at Ford chose it, I'm a fan, I like that it matches the wood grain interior and it's just more interesting than the black shift ball.
FYI the 69 Shelby was engineered to have the Cougar all woodgrained knob but in the real world some got the Mach I knob too. I have seen numerous low mile originals over the years that had the Mach I knob. It has been extra hard to determine if authentic to a car because the Mach I knob was default knob chosen when many cars got restored. I have wanted to deduct because I felt the choice many times was simply done because the owner/restorer didn't know any better but given the reality of some that got used it wouldn't be fair.  Ether one is acceptable in concours judging .