« previous next »
Pages: [1]   Go Down

Author Topic: Ford bumper cover rivets with rings on the flange  (Read 2849 times)

Offline 91saleen26

  • Newbie
  • *
  • Posts: 9
Ford bumper cover rivets with rings on the flange
« on: April 21, 2018, 11:38:11 PM »
ISO bumper cover rivets with the light rings on them.
Logged

Offline KevinK

  • Hero Member
  • *****
  • Posts: 532
Re: Ford bumper cover rivets with rings on the flange
« Reply #1 on: April 22, 2018, 01:53:41 AM »
I looked around and could not find any. I suspect the supplier changed how they are made.

It should not be too hard to replicate the look. Machining would require re-anodizing. Some light punch marks might be the trick.
Logged
MCA #33800, Gold Card 3rd Gen
BAMA Member
67 Coupe, 69 Coupe, 74 Coupe, 84 SVO, 84 GT Turbo, 86 GT, 88 McLaren, 89 LX Sport, 03 Mach 1, 07 GT500, 14 GT/CS

Offline KevinK

  • Hero Member
  • *****
  • Posts: 532
Re: Ford bumper cover rivets with rings on the flange
« Reply #2 on: April 30, 2018, 06:55:40 PM »
I had a friend search for the correct rivets. No luck.  I also did some searching at SEMA vendors. Most people don’t get it. As any rivet will hold it on just fine.  Attached is what we typically find today.
Logged
MCA #33800, Gold Card 3rd Gen
BAMA Member
67 Coupe, 69 Coupe, 74 Coupe, 84 SVO, 84 GT Turbo, 86 GT, 88 McLaren, 89 LX Sport, 03 Mach 1, 07 GT500, 14 GT/CS
Pages: [1]   Go Up
« previous next »