Author Topic: Correct shade of black for engine bay.  (Read 3392 times)

Offline ruger

  • Full Member
  • ***
  • Posts: 173
Correct shade of black for engine bay.
« on: July 10, 2017, 11:06:23 AM »
Hi,  has anyone ever used SPI black epoxy for their engine bay black?   Curious if this would be close to the correct shade of black.  I have used their black epoxy before, it's sprays great. 
1969 Sportsroof Mustang E'
63D
250 six cyl.
C4 trans.
Dearborn build Nov. 1968

Offline drummingrocks

  • Hero Member
  • *****
  • Posts: 1291
Re: Correct shade of black for engine bay.
« Reply #1 on: July 10, 2017, 09:54:08 PM »
I used it several years ago.  I remember it being too shiny/glossy for my taste.  I resprayed it with satin black and was much happier.
Too much junk, too little time.

Offline tvor

  • Full Member
  • ***
  • Posts: 108
Re: Correct shade of black for engine bay.
« Reply #2 on: July 12, 2017, 10:18:31 PM »
I used black zinc chromate and really liked the results.  More of a satin finish, but not sure how close it is to an original finish.  The good thing about zinc chromate is that is rust and corrosion resistant.  It was also developed by Ford :-)

If you do use zinc chromate, be sure to wear a respirator (For the little spraying that I did, I used the cartridge units)

Unfortunately, they don't allow the stuff in Kalifornia anymore   >:(

https://en.wikipedia.org/wiki/Zinc_chromate
'65 Coupe, built in San Jose.
289 CID with C4 trans.
Door plate date of 9/11/64
Original owner - mom
Second owner - me!

Offline CharlesTurner

  • Charles Turner
  • Administrator
  • Hero Member
  • *****
  • Posts: 7614
Re: Correct shade of black for engine bay.
« Reply #3 on: July 13, 2017, 12:19:47 AM »
Has been discussed several times before here.  Should find more info using Search.
Charles Turner - MCA/SAAC Judge
Concours Mustang Forum Admin

Offline ruger

  • Full Member
  • ***
  • Posts: 173
Re: Correct shade of black for engine bay.
« Reply #4 on: July 13, 2017, 11:03:14 AM »
Has been discussed several times before here.  Should find more info using Search.

I just did a search again,   all I got was this very thread.  Sorry,  I have tried but just cannot get much. 
« Last Edit: July 13, 2017, 11:19:08 AM by ruger »
1969 Sportsroof Mustang E'
63D
250 six cyl.
C4 trans.
Dearborn build Nov. 1968

Offline jwc66k

  • Hero Member
  • *****
  • Posts: 7098
Re: Correct shade of black for engine bay.
« Reply #5 on: July 13, 2017, 12:43:26 PM »
I just did a search again,   all I got was this very thread.  Sorry,  I have tried but just cannot get much.
I did a search too, but I used only two words, engine bay. I got 18 pages. Yes, you need to need to scan thru a lot of posts that are not exactly what you want, but that's what it takes. If you used engine bay in parenthesis, like this - "engine bay" - you get 13 pages to scan. That technique, using parenthesis, is NOT a sanctioned practice of this forum, but it works.
Jim
I promise to be politically correct in all my posts to keep the BBBB from vociferating.

Offline 67gta289

  • Hero Member
  • *****
  • Posts: 3008
Re: Correct shade of black for engine bay.
« Reply #6 on: July 13, 2017, 01:55:54 PM »
Another thing to consider is to look for "engine compartment black" instead of "bay".  A lot of us use compartment over bay.  Even some in the general area of the city by the compartment :)

There are 8 pages of search results
John
67 289 GTA Dec 20 1966 San Jose
7R02C156xxx
MCA 74660

Offline midlife

  • Wiring Guru---let me check your shorts!
  • Global Moderator
  • Hero Member
  • ****
  • Posts: 2155
    • Midlife Harness Restorations
Re: Correct shade of black for engine bay.
« Reply #7 on: July 13, 2017, 03:18:13 PM »
Another thing to consider is to look for "engine compartment black" instead of "bay".  A lot of us use compartment over bay.  Even some in the general area of the city by the compartment :)

There are 8 pages of search results

Maybe that's why I can't find Compartment Leaves in the grocery store....
Midlife Harness Restorations - http://midlifeharness.com

Offline ruger

  • Full Member
  • ***
  • Posts: 173
Re: Correct shade of black for engine bay.
« Reply #8 on: July 13, 2017, 04:51:38 PM »
Thanks everyone,  I will use different wording. 
1969 Sportsroof Mustang E'
63D
250 six cyl.
C4 trans.
Dearborn build Nov. 1968

Offline ruger

  • Full Member
  • ***
  • Posts: 173
Re: Correct shade of black for engine bay.
« Reply #9 on: July 14, 2017, 07:43:21 AM »
Thanks,  I changed bay to compartment and got tons more info.  Thanks for the tip.
1969 Sportsroof Mustang E'
63D
250 six cyl.
C4 trans.
Dearborn build Nov. 1968

Offline OldMustangGuy

  • Jr. Member
  • **
  • Posts: 80
Re: Correct shade of black for engine bay.
« Reply #10 on: August 18, 2017, 02:19:08 AM »
I use SPI epoxy with about 30% reducer....you might have to vary the reducer a bit depending on temperature and humidity. It comes out with a very nice SG finish and is tough as nails. Stands up to brake fluid, etc. There have been previous comments about epoxy and UV degradation but SPI adds UV inhibitors plus I doubt if most cars will spend enough time with their hoods up in the open sun to make a difference anyway.

Epoxy has a bit of a learning curve to learn how to get it to spray nicely but once you get the hang of it you'll want to use it for everything.