1st Generation 1964 1/2 - 1973 - Questions & general discussions that apply to a specific year > 1964 1/2 - 1965
Color for steering parts
(1/1)
MustangAndFairlane1867:
Need some help determining the correct paint color (if any) for the steering box, pitman and idler arm in my 1965 Mustang Fastback (5R09Kxxxxxx) with scheduled assembly date of February 1965. I have all the parts out of the car, de-greased, detailed and ready to paint. Many thanks for some advice.
J_Speegle:
Trick question - they were not painted.
Each was bare metal and the finishes were determined by how they were made (cast, machined, heat treated) and treated. Some of the parts will have multiple finishes (example steering box will have cast surfaces, machined purposes and a plated plug) so painting normally is difficult to get one finish that is close but near impossible to get multiple ones.
Plenty of discussions of how to finish and protect as well as personal experiences and failures shared in earlier threads There is also an article in the Library that covers reproducing natural finished Believe its titled Natural Finishes - Reproducing that covers for an example redoing a set of later tie rods
Since your asking specifically about 65 this is just one of the threads that might be helpful. Search is your friend most of the time :)
http://www.concoursmustang.com/forum/index.php?topic=1169.msg5930#msg5930
MustangAndFairlane1867:
Thanks, Jeff! Ron...
Navigation
[0] Message Index
Go to full version