Author Topic: Need an I6 6cyl Emergency Brake Shoe Bar PIN (Used Original)..  (Read 788 times)

Offline NEFaurora

  • Hero Member
  • *****
  • Posts: 970
Need an I6 6cyl Emergency Brake Shoe Bar PIN (Used Original)..
« on: February 02, 2018, 12:25:01 AM »
Subject: Need an I6 6cyl Emergency Brake Shoe Bar PIN (Used Original)..  What I need here is the Small 1" inch long Steel Pin that secures the I6 Rear Emergency Brake bar to the Rear Brake shoe. It is usually secured with a small bendable "U" clip and friction washer.   I just need a good Used Original Rear PIN for the Rear Brakes...It holds the Emergency Brake cable bar to the Rear Brake shoe. 

E-mail me at NEFaurora@aol.com if you have one or more that you can part with and what you want for it...

Thanks,  Tony K.   :o)



« Last Edit: February 02, 2018, 12:36:23 AM by NEFaurora »
Tony Kovar (NEFaurora@aol.com)
1965 Mustang Convertible 200 cid 3spd manual
1966 Mustang Convertible Sprint 200 C4 Auto
2007 Mustang Convertible V6 Auto with "Pony Package".
1966 Mustang Sprint 200 Registry Owner/Moderator
MCA#70001

Offline NEFaurora

  • Hero Member
  • *****
  • Posts: 970
Re: Need an I6 6cyl Emergency Brake Shoe Bar PIN (Used Original)..
« Reply #1 on: February 02, 2018, 10:54:44 AM »

PS: I think the technical name for the pin(s) is the "Parking Brake Lever Pivot Pin" to be more correct....

Is the I6 pin the same as the V8 pin????

Got one??

:o)

Tony K.
Tony Kovar (NEFaurora@aol.com)
1965 Mustang Convertible 200 cid 3spd manual
1966 Mustang Convertible Sprint 200 C4 Auto
2007 Mustang Convertible V6 Auto with "Pony Package".
1966 Mustang Sprint 200 Registry Owner/Moderator
MCA#70001

Offline 67gta289

  • Hero Member
  • *****
  • Posts: 3009
Re: Need an I6 6cyl Emergency Brake Shoe Bar PIN (Used Original)..
« Reply #2 on: February 02, 2018, 12:05:09 PM »
I might.  What part# do you have for the V8?  Also a pic of what you are looking for will help.
John
67 289 GTA Dec 20 1966 San Jose
7R02C156xxx
MCA 74660

Offline Bossbill

  • Hero Member
  • *****
  • Posts: 3249
  • In the middle of project hell
Re: Need an I6 6cyl Emergency Brake Shoe Bar PIN (Used Original)..
« Reply #3 on: February 02, 2018, 03:34:49 PM »
I had the MPC open . . .

If you are referring to the lever (which includes the pin).
it's a  "2A637-8 Lever Parking Brake Cable to Secondary Brake Shoe".

Looks like I6 and V8 are the same but they are different by drum sizes.
10" brakes are C9ZZ-2A637-A /  C9ZZ-2A638-A (RH/LH)
9" brakes are C9ZZ-2A637-B / C9ZZ-2A638-B (RH/LH)

A length of the item might help here.
Bill
Concours  Actual Ford Build 3/2/67 GT350 01375
Driven      6/6/70 0T02G160xxx Boss 302
Modified   5/18/65 5F09A728xxx 347 Terminator-X 8-Stack
Race        65 2+2 Coupe conversion

Offline Andrew@MagMustangs

  • Sr. Member
  • ****
  • Posts: 334
  • MagMustangs: Original Parts for 64 1/2-73 Mustangs
    • MagMustangs
Re: Need an I6 6cyl Emergency Brake Shoe Bar PIN (Used Original)..
« Reply #4 on: February 02, 2018, 07:36:03 PM »
The 10" brake lever on V8 cars did not have a separate pin like the 9" brake lever on 6 cylinder cars.
MagMustangs: Vintage Mustang Enthusiasts. We have Original Factory Parts for 1964 1/2-1973 Ford Mustang.   Like Us On Facebook. https://www.facebook.com/MagMustangs

Offline NEFaurora

  • Hero Member
  • *****
  • Posts: 970
Re: Need an I6 6cyl Emergency Brake Shoe Bar PIN (Used Original)..
« Reply #5 on: February 03, 2018, 03:22:36 AM »
Here's a pic...!!  I found one in my garage...but I'd still like to find a source/supplier of these for the future...for I6 cars.

Sorry, but I forgot to measure it before I installed it today...

:o)

Tony K.

« Last Edit: February 03, 2018, 03:25:13 AM by NEFaurora »
Tony Kovar (NEFaurora@aol.com)
1965 Mustang Convertible 200 cid 3spd manual
1966 Mustang Convertible Sprint 200 C4 Auto
2007 Mustang Convertible V6 Auto with "Pony Package".
1966 Mustang Sprint 200 Registry Owner/Moderator
MCA#70001