Author Topic: 1964.5 mustang road draft tube hardware  (Read 1763 times)

Offline macdude67

  • Jr. Member
  • **
  • Posts: 69
1964.5 mustang road draft tube hardware
« on: March 31, 2010, 10:54:06 PM »
Can anyone describe the 3 bolts that hold down the intake manifold mounted road draft tubes? I am looking for specifics regarding headstamping, washer type and coating. I am working with a June 14 1964 mustang with a C-4 and 260 V-8.

Offline 5F09CNot4Sale

  • Full Member
  • ***
  • Posts: 195
  • If it does not fit, you need a bigger hammer!
Re: 1964.5 mustang road draft tube hardware
« Reply #1 on: April 01, 2010, 12:09:37 AM »
I have a june 29 64 1/2 260. I will have to dig up my road draft tube and hardware.
5F09C3031XX Sept 28 64 Dearborn
5F07F1838XX June 29 64 Dearborn

Offline kutzoh

  • Gold Level Subscriber
  • Full Member
  • *****
  • Posts: 220
Re: 1964.5 mustang road draft tube hardware
« Reply #2 on: April 01, 2010, 01:13:24 AM »
I'm interested also Brian, I've got a manifold mounted road draft tube also and I was going to refer to Bob Mannel's book but I loaned it out.

Greg
64.5 Dearborn coupe, D-Code, June 28, 1964   Skylight Blue


Offline macdude67

  • Jr. Member
  • **
  • Posts: 69
Re: 1964.5 mustang road draft tube hardware
« Reply #3 on: April 01, 2010, 08:29:14 PM »
there are a few pics in Bob Mannel's book but no close ups of the hardware. I can say that the hareware that held mine down used a lock washer and and not a type of star washer like the bolts that hold down the throttle bell crank assembly to the intake manifold.

Offline 5F09CNot4Sale

  • Full Member
  • ***
  • Posts: 195
  • If it does not fit, you need a bigger hammer!
Re: 1964.5 mustang road draft tube hardware
« Reply #4 on: June 25, 2010, 06:33:41 PM »
Sorry it took me a bit to find the box that had the ziplock with this in it. In the process of moveing and have everything boxed up. Same bolt X3.

Here you go, enjoy, cuss and discuss.

5F09C3031XX Sept 28 64 Dearborn
5F07F1838XX June 29 64 Dearborn