ConcoursMustang Forums

Marketplace => Wanted Ads => Topic started by: Ralf on March 13, 2016, 04:09:45 AM

Title: WTB: NOS Rocker Molding Panels Convertible 1967
Post by: Ralf on March 13, 2016, 04:09:45 AM

Hi,
Looking for NOS Rocker Molding Panels Convertible 1967. If smb will sell, pls pm.

(http://img5.fotos-hochladen.net/thumbnail/sl1600j6xe4kdgah_thumb.jpg) (http://www.fotos-hochladen.net/view/sl1600j6xe4kdgah.jpg)

Ralf

Title: Re: WTB: NOS Rocker Molding Panels Convertible 1967
Post by: 68GT/CSconvmod on April 04, 2016, 03:29:32 PM

Nos set on KPRcraigslist.org  type in nos mustang.


Troy

Title: Re: WTB: NOS Rocker Molding Panels Convertible 1967
Post by: Ralf on April 09, 2016, 05:36:45 AM

Had found after hard searching another pair. And asked a well known member here in this forum for support to buy them . What did this nice guy do? He bought them for himself! Great!  :-X Of course he is not answering my pm's anymore...
The person who sells the pair above will not ship to me, even I said the parts can be shipped to Troy (MI) to a friend of mine and  takes care for shippment to GER.
So, I'm still looking to find a reliable person helping me. May be smb even gonna sell his pair to me.
Thx
Ralf

Title: Re: WTB: NOS Rocker Molding Panels Convertible 1967
Post by: Ralf on April 09, 2016, 11:56:20 AM

Could anybody help me to buy above rockers (craiglist) and than to ship them to Troy (MI)?
May be smb who lives relatively close to this guy (ZILLAH)?
West US (Washington, Oregon, Idaho, Nevada, CA, .....)
Would be fantastic.
Thx Ralf

Title: Re: WTB: NOS Rocker Molding Panels Convertible 1967
Post by: 68GT/CSconvmod on April 09, 2016, 12:17:57 PM

I live in Oregon, The KPR add is gone. You said you was looking to pay only $350.00 and he wanted $500.00.  I will look around for another set. I have no problem shipping to MI for you. Your going to have to up your price to the $500 range. I sold my last set for that price plus shipping.

Title: Re: WTB: NOS Rocker Molding Panels Convertible 1967
Post by: Ralf on April 09, 2016, 12:52:03 PM

I did not say anything on pricing to him, not at all. I was only asking what his minimum price will be, but not mentioned any number.

I'm ok with around 500 + shipping.


Thx for looking around.

Pls pm to me, because I made the bad experience that here are some guys around taking their advantage of searched results provided by others (in this case by me who would buy it).


Ralf

Title: Re: WTB: NOS Rocker Molding Panels Convertible 1967
Post by: Building 3 on April 09, 2016, 01:17:47 PM

Ralf: Why don't you take one step and one person out of the process by having your friend in Troy, Michigan buy them for you and ship them to you? This way you don't need an intermediary between the seller and your friend the shipper.  That just seems simpler to me.

Title: Re: WTB: NOS Rocker Molding Panels Convertible 1967
Post by: Ralf on April 09, 2016, 01:31:49 PM

You're absolutely right.
However, in this specific case on craiglist seller, it is obvious that he will not ship the parts thousands of miles....
The reason why I'm asking for help here.
https://yakima.craigslist.org/pts/5510753427.html
Ralf

Title: Re: WTB: NOS Rocker Molding Panels Convertible 1967
Post by: 68GT/CSconvmod on April 09, 2016, 03:07:22 PM

I live 2 hrs from the craigslist guy, I sent a request on them to him,If he still has them work something out and I can meet up with him for exchange. I have no problem shipping to your friend.


Troy in Oregon

Title: Re: WTB: NOS Rocker Molding Panels Convertible 1967
Post by: Ralf on April 09, 2016, 03:23:43 PM

Thank you for your support.
But pm me, since here is one guy who is taking advantage in buying wanted 67 parts before the TO can do.
Ralf

Title: Re: WTB: NOS Rocker Molding Panels Convertible 1967
Post by: Ralf on April 11, 2016, 03:00:35 AM

I've a source to buy rocker moldings (US).
How to detect if these are real NOS parts? Any stamped numbers inside (except on the assembled front fender clip with C7  XXX on, but not a proof for the moldings itself)?
What could be the evidence?
Unfortunately I can not touch the parts to feel the difference.....too far away ;-)
Thx Ralf

Title: Re: WTB: NOS Rocker Molding Panels Convertible 1967
Post by: ruppstang on April 11, 2016, 09:43:32 AM

There are no marks or numbers that I am aware of. The appearance or sealed packaging is your only clue.

Title: Re: WTB: NOS Rocker Molding Panels Convertible 1967
Post by: 196667Bob on April 11, 2016, 11:17:51 AM

The "crimped in" Front Fender Clip may provide a clue, although I'm not familiar with what is being offered for this in the Repo's. As has been mentioned in other threads, this Clip is part of the Rocker Panel Moldings, and not considered one of the included "Attaching Parts".

Bob

Title: Re: WTB: NOS Rocker Molding Panels Convertible 1967
Post by: Ralf on April 12, 2016, 10:55:24 AM

Thx to the above.

Thx Ralf

Title: Re: WTB: NOS Rocker Molding Panels Convertible 1967
Post by: Ralf on May 05, 2016, 04:54:30 PM

UP :)

Title: Re: WTB: NOS Rocker Molding Panels Convertible 1967
Post by: Ralf on May 26, 2016, 05:59:23 AM

Bump

Title: Re: WTB: NOS Rocker Molding Panels Convertible 1967
Post by: 67gtasanjose on June 03, 2016, 07:03:26 PM

I found a pair of NOS at Carlisle this weekend. NOT CHEAP though. I can PM you his contct info if still interested
Vendor won't ship overseas, do you have a USA 48-state location (3rd party) they can be sent to?

Title: Re: WTB: NOS Rocker Molding Panels Convertible 1967
Post by: Ralf on June 12, 2016, 06:07:53 AM

Not successful so far....

Title: Re: WTB: NOS Rocker Molding Panels Convertible 1967
Post by: Ralf on October 07, 2016, 01:46:21 PM

Still looking.

Was close before this week to get a set on ebay, but there was a nice guy who offered the seller a certain sum and the seller ended the auction :-[

Hope I'll get a NOS pair some time.....

Thx Ralf

Title: Re: WTB: NOS Rocker Molding Panels Convertible 1967
Post by: 68GT/CSconvmod on October 07, 2016, 02:39:39 PM

Getting harder to find and you may have to pay more for a set.

Troy

Title: Re: WTB: NOS Rocker Molding Panels Convertible 1967
Post by: Ralf on October 20, 2016, 03:39:06 AM

First I need someone who is willingly to sell. Second price.
Thx
Ralf

Title: Re: WTB: NOS Rocker Molding Panels Convertible 1967
Post by: Ralf on November 18, 2016, 02:37:10 PM

Still wanted  :)

Title: Re: WTB: NOS Rocker Molding Panels Convertible 1967
Post by: Ralf on December 03, 2016, 02:42:48 PM

RH side would be sufficient for the time being  ;)
Thx Ralf

Title: Re: WTB: NOS Rocker Molding Panels Convertible 1967
Post by: Ralf on January 03, 2017, 12:40:14 PM

CLOSED
Could purchase a NOS pair incl. all NOS clipses.
Thx.
Ralf

Title: Re: WTB: NOS Rocker Molding Panels Convertible 1967
Post by: Ralf on March 11, 2017, 11:42:35 AM

Here we go....assembled today.