Author Topic: '67 choke heat tube(s) with 4300 carb illustration  (Read 2626 times)

Offline socalgt

  • Hero Member
  • *****
  • Posts: 548
'67 choke heat tube(s) with 4300 carb illustration
« on: June 25, 2015, 08:26:00 PM »
Looking for an illustration of the heat tube(s) connected to a 4300 carb on a '67 289....(hard enough just to find a picture of a '67 with it's original 4300)

Offline J_Speegle

  • Administrator
  • Hero Member
  • *****
  • Posts: 24173
Re: '67 choke heat tube(s) with 4300 carb illustration
« Reply #1 on: June 25, 2015, 10:10:28 PM »
Harder to find one with the air cleaner off for a picture ;)

Pre-formed rubber hose connects it to the metal port on the rear of the carb

Sorry don't have a rear shot of that specific spot on a car. Looked through the Ford manual on the carb (sort of an intro to the 4300 for 67) and didn't find a illustration of that


Jeff Speegle

Anything worth doing is worth doing concours ;)

Offline socalgt

  • Hero Member
  • *****
  • Posts: 548
Re: '67 choke heat tube(s) with 4300 carb illustration
« Reply #2 on: June 26, 2015, 12:46:57 AM »
Thanks much for  the picture....first of  seen showing the carb, fuel line and choke tube...very helpful.

Offline 67gtasanjose

  • Hero Member
  • *****
  • Posts: 5084
  • "Take the MUSTANG PLEDGE"
Re: '67 choke heat tube(s) with 4300 carb illustration
« Reply #3 on: June 26, 2015, 05:49:00 AM »

* I thought I would tag this image as a 67 A-code with thermactor also.
Richard Urch

1967 (11/2/66, S.J.) GTA Luxury Coupe, 289-4V w/Thermactor Emissions, C-4, Int./Ext. Decor +many options

2005 (04/05) GT Premium Convertible, Windveil Blue, Parchment Top w/Med. Parchment interior,  Roush Body Appointments

Offline Hipo giddyup

  • Hero Member
  • *****
  • Posts: 1201
  • There is no end to doing right. Giddyup!!!
Re: '67 choke heat tube(s) with 4300 carb illustration
« Reply #4 on: June 26, 2015, 03:30:44 PM »
  +1 and it looks to also have AC?  For whatever reason, the aircleaner stud for the 4300's are not nearly as common to find as the 4100's?  :o Just in my experience.. maybe another oddity about these carbs. Rarely do they come up for sale on eBay.
1967 Springtime Yellow Coupe, 289 2v 3spd, Metuchen built, Nov. 17th 66'
1966 Sahara Beige Coupe, 289 2v 3spd, Dearborn built, July 21st 66'
1964 1/2 Pagoda Green Coupe, 260 2v 3spd, Dearborn built, June 30th 64'
1966 GT350 Fastback clone, 289 HiPo, 725cfm Holley, 4spd, SanJose built, Nov 25th 65'

Offline J_Speegle

  • Administrator
  • Hero Member
  • *****
  • Posts: 24173
Re: '67 choke heat tube(s) with 4300 carb illustration
« Reply #5 on: June 26, 2015, 04:24:36 PM »
Year ago bought a big stack of NOS 4300's - Not factory rebuilts. Sold a few to restorers and about half (kept a couple of the heck of it) to guys that just wanted to pass the Bi-annual smog checks here in Calif
Jeff Speegle

Anything worth doing is worth doing concours ;)

Offline 7R02A

  • Full Member
  • ***
  • Posts: 106
Re: '67 choke heat tube(s) with 4300 carb illustration
« Reply #6 on: March 11, 2017, 12:45:49 PM »
Hi all, bring up an old thread.  I just purchased a choke tube set from NPD for my autolite 4300 equipped 67 A code.  I tried installing it this morning to find it is not the correct tube.  Double checked numbers to make sure I purchased the right part and it was according to their catalog.  It appears that it would fit the hi po with the 4100 carb, but as you know the 4300 tube enters the choke at a completely different angle.  Question is, "Does anyone know where to purchase the correct tube?  Are others just making their own?  Unfortunately I do not have an original to use as a pattern, so I would have to rely on pictures to make one.  Car details are in my signature.
Thank you,
John
John
1967 Fastback, A code, automatic transmission, Deluxe interior, AC, PS, P disc brakes, tilt, consoles, exterior group, fold down, DSO 71.
San Jose build, Actual build: Dec 17, 66.

Offline 7R02A

  • Full Member
  • ***
  • Posts: 106
Re: '67 choke heat tube(s) with 4300 carb illustration
« Reply #7 on: March 11, 2017, 03:07:00 PM »
Never mind, I figured it out.  I purchased the wrong part.  NPD's website list the part I purchased as applicable to all 289's.  When you look in their paper catalog, it has a note that this part only fits 2v carbs. Wish NPD would add the comment to their website that this part only fits 2v carbs.  Sorry to bother everyone.
John
John
1967 Fastback, A code, automatic transmission, Deluxe interior, AC, PS, P disc brakes, tilt, consoles, exterior group, fold down, DSO 71.
San Jose build, Actual build: Dec 17, 66.

Offline 67gtasanjose

  • Hero Member
  • *****
  • Posts: 5084
  • "Take the MUSTANG PLEDGE"
Re: '67 choke heat tube(s) with 4300 carb illustration
« Reply #8 on: March 11, 2017, 04:04:16 PM »
Since we are "digging up bones", Jeff...do you have more pictures of this vehicle or more info on the car's date, I assume it is a San Jose...
Richard Urch

1967 (11/2/66, S.J.) GTA Luxury Coupe, 289-4V w/Thermactor Emissions, C-4, Int./Ext. Decor +many options

2005 (04/05) GT Premium Convertible, Windveil Blue, Parchment Top w/Med. Parchment interior,  Roush Body Appointments

Offline J_Speegle

  • Administrator
  • Hero Member
  • *****
  • Posts: 24173
Re: '67 choke heat tube(s) with 4300 carb illustration
« Reply #9 on: March 14, 2017, 04:53:11 PM »
Since we are "digging up bones", Jeff...do you have more pictures of this vehicle or more info on the car's date, I assume it is a San Jose...

Sorry took a few days - been setting up a new machine. And no I could not find any additional pictures of related shots from that car.
Jeff Speegle

Anything worth doing is worth doing concours ;)