Author Topic: '68 Brushed Aluminum Panels  (Read 885 times)

Offline Oz390

  • Hero Member
  • *****
  • Posts: 756
'68 Brushed Aluminum Panels
« on: May 20, 2010, 05:40:37 PM »
Picked up an OK condition upper console.  A few minor wobbles in the aluminum trim, which can be flattened.  Wondering what the best process to restore the brushed surface is... make up a jig and run a scotch-brite pad or high grit sandpaper evenly along the length... or ????  Is it left bare or coated?
8R03S : 76A I 2A 15M 72 5 U
8R01S : 65A B 2A 28M 72 7 5 - Factory GT
8R01C : 65A M 2A 01E 72 2 W - Cal Special
8F01X : 65A I 2A 2G 20E 24 1 U - EXP500 repli-bute

Offline Sunlitgold68

  • Sr. Member
  • ****
  • Posts: 439
Re: '68 Brushed Aluminum Panels
« Reply #1 on: May 20, 2010, 05:47:09 PM »

You might want to contact Ray at Quality Mustangs. http://qualitymustangs.tripod.com/

He could probably help you out and give you some nice suggestions.
8T01C204XXX

Built May 14th, 1968

Original Owners, custom ordered from Clemmons Ford, Henderson NC