Author Topic: 1969 Firewall Blower Motor Shield Question  (Read 3530 times)

Offline rockhouse66

  • Hero Member
  • *****
  • Posts: 927
Re: 1969 Firewall Blower Motor Shield Question
« Reply #15 on: February 01, 2017, 02:34:10 PM »
If you choose to not use a shield then I would suggest to mimic the way it would have looked - shield installed and then sound deadener applied then shield taken off = witness line of were it was at. I hope that makes sense.

Bob - sort of like this on my unrestored SJ car?
Jim
'66 GT FB

Offline Brian Conway

  • Hero Member
  • *****
  • Posts: 1623
Re: 1969 Firewall Blower Motor Shield Question
« Reply #16 on: February 01, 2017, 03:15:10 PM »
Looking at the pictures provided by Jeff it seems that at least a couple of the Shields don't have the Metuchen assembly line screws installed ?  Hard to tell but; 1,3 and 5 ?  Brian
« Last Edit: February 01, 2017, 03:34:37 PM by Brian Conway »
5RO9A GT  4 Spd Built 5/29/65
9TO2R SCJ 4 Spd Built 9/19/68
Owner Driver Mechanic
San Diego, Ca.

Offline Bob Gaines

  • Global Moderator
  • Hero Member
  • ****
  • Posts: 8956
Re: 1969 Firewall Blower Motor Shield Question
« Reply #17 on: February 01, 2017, 05:15:18 PM »
Bob - sort of like this on my unrestored SJ car?
Very good example . thank you for sharing.
Bob Gaines,Shelby enthusiast, Shelby collector , Shelby concours judge SAAC,MCA,Mid America Shelby

Offline Vcode

  • Full Member
  • ***
  • Posts: 134
Re: 1969 Firewall Blower Motor Shield Question
« Reply #18 on: February 01, 2017, 09:43:26 PM »
If you choose to not use a shield then I would suggest to mimic the way it would have looked - shield installed and then sound deadener applied then shield taken off = witness line of were it was at. I hope that makes sense.

Thanks for the tip - I will keep that in mind.

Offline Vcode

  • Full Member
  • ***
  • Posts: 134
Re: 1969 Firewall Blower Motor Shield Question
« Reply #19 on: February 01, 2017, 09:44:13 PM »
Bob - sort of like this on my unrestored SJ car?

Jim - Thanks for posting that picture.