Author Topic: Vacuum advance bad / 289 2 barrell ??  (Read 4306 times)

Offline mtinkham

  • Sr. Member
  • ****
  • Posts: 359
  • That'll be easy
Re: Vacuum advance bad / 289 2 barrell ??
« Reply #15 on: April 10, 2017, 01:42:54 PM »
Thank you. I addressed the oversized holes/fasteners, verified vacuum source to be ported, and replaced the vacuum advance.  Problem solved.  However, the original vacuum advance passed the "suction" test. I did notice the coil lead and the condenser lead were slightly angled.  Maybe with the oversized hole condition, the advance linkage was momentarily shorting out on these wires....anyway it is resolved.
Thank you for providing guidance and advice.
Mark
1967 S-code Fastback, GT, 3-speed manual, Metuchen, Scheduled 04-21-1967 - Actual 04-25-1967