Author Topic: Transmission Crossmember Hardware  (Read 549 times)

Offline ChrisV289

  • Hero Member
  • *****
  • Posts: 1956
Transmission Crossmember Hardware
« on: January 08, 2018, 10:44:56 AM »
Jim or Jeff, can you confirm the hardware used in the crossmember? I can't pull the excel sheet at this time. I took  mine out and I have two long bolts each with a lock washer and nut. The amk kit sold by npd and Virginia mustang have the same except only have one regular washer, not a lock one and only one. Why only one?
Chris
1965 Honey Gold Fastback (SJ 10/29/64)
1965 Caspian Blue Fastback (SJ 06/03/65)
2009 V6 Mustang Coupe

Offline rockhouse66

  • Hero Member
  • *****
  • Posts: 927
Re: Transmission Crossmember Hardware
« Reply #1 on: January 08, 2018, 11:44:54 AM »
The washer is used on the slotted hole.  No lockwasher - lock nuts instead.  Picture below - disregard the extra flat washer shown.

« Last Edit: January 08, 2018, 11:47:33 AM by rockhouse66 »
Jim
'66 GT FB

Offline jwc66k

  • Hero Member
  • *****
  • Posts: 7098
Re: Transmission Crossmember Hardware
« Reply #2 on: January 08, 2018, 05:06:08 PM »
For future reference, that mount is referred to by Ford as the rear engine mount.
Jim
I promise to be politically correct in all my posts to keep the BBBB from vociferating.