ConcoursMustang Forums
1st Generation 1964 1/2 - 1973 - Questions & general discussions that apply to a specific year => 1968 Mustang => Topic started by: stillboardin on February 17, 2010, 12:56:18 AM
-
I asked this question on another forum and was made to feel like an idiot. But I am trying to find the answer.
The air cleaner on my 68 302 is original. On the underside of the lid is a round piece of what looks like carpet underlayment glued to the lid. I presume it is a sound deadener of sorts. It has become very brittle and looks like it will start flaking off if I don't do something. (the car is not being driven now)
Has anyone else seen this on a January 68 build SJ car?
(http://lh4.ggpht.com/_5XSvLuFVhLA/S3oV2yWWv_I/AAAAAAAAAzk/nEXD6wiMXX0/s800/IMG_3059.JPG)
This is on the underside of the lid
I was told it looked like a cutoff wheel, which it does but that really doesn't help me.
-
Yes have seen them on air cleaner lids at yards - don't recall attaching the detail to 68 Mustang specifically. Know I've removed the stuff from a few ;)
Don't recall any TSB article mention of the detail - Hate to see what happens when the stuff starts breaking down and falling down the carb. Maybe that is why they didn't do it for very long or on very many.
Another possibility is that this was some service shops fix for some owners complaint - just a thought
-
Thanks for the reply. Makes more sense and much more intelligent than the reply's on the other forum.
-
Thanks for the reply. Makes more sense and much more intelligent than the reply's on the other forum.
Glad we were able to help. I have been amazed at the quality of information and how cordial folks have been here on the concours forum!
-
i was one of the responders on the other forum. i apologize if you took my response wrong. i have never seen this stuff on any type of air cleaner & was just agreeing with the other poster. obviously we are misinformed in this area. again i apologize.
-
i was one of the responders on the other forum. i apologize if you took my response wrong. i have never seen this stuff on any type of air cleaner & was just agreeing with the other poster. obviously we are misinformed in this area. again i apologize.
One bonking on the head with a judging clip-board at the next show for you! ;D :o
-
i was one of the responders on the other forum. i apologize if you took my response wrong. i have never seen this stuff on any type of air cleaner & was just agreeing with the other poster. obviously we are misinformed in this area. again i apologize.
Sorry, didn't mean to dump on you it was the previous poster who needed a little bit better bedside manner.
-
no problem. but if it were mine i would remove that stuff be it factory or not. if it is crumbling it will get in the carb and cause problems.
-
It will be coming off when I refinish the air cleaner.
Thanks to all who responded
-
Two more questions about this air cleaner.
1. The gasket on the lid. I assume that general purpose weatherstrip adhesive is used to attach the new gasket?
2. The vacuum snorkel actuator is missing the vacuum hose nub (must have broken off). Is this actuator remanufactured or is there a way to fix this. (no pictures available until this afternoon)
-
Two more questions about this air cleaner.
1. The gasket on the lid. I assume that general purpose weatherstrip adhesive is used to attach the new gasket?
Yes that will work holding the seal to the lid
2. The vacuum snorkel actuator is missing the vacuum hose nub (must have broken off). Is this actuator remanufactured or is there a way to fix this. (no pictures available until this afternoon)
Not sure if there are reproductions or replacements available - guess you can check with your local parts store to start. You might be able to fix it with epoxy but it will not look original nor last forever