Author Topic: 68 deluxe dash emblem placement  (Read 1634 times)

Offline sigtauenus

  • Newbie
  • *
  • Posts: 15
68 deluxe dash emblem placement
« on: July 17, 2010, 07:17:15 PM »
I bought the Scott Drake dash pieces with the woodgrain on a metal insert. As such there are no predrilled holes for the deluxe dash emblem on the upper right trim panel.

Can I please get a measurement for the emblem?

Thanks,
Sam

Offline Bill Cabaniss

  • Jr. Member
  • **
  • Posts: 60
Re: 68 deluxe dash emblem placement
« Reply #1 on: July 21, 2010, 06:52:23 PM »
 If you are talking about the piece above the glove box mine has these measurements. This measurement is from the outside edge of the emblem to the inside edge of the trim panel. From the trim panel straight up to the emblem is 5/8 inch. From the edge of the emblem straight right to the inside edge of the trim panel is 3 1/4 inches. If you need more just ask. Bill.
Highland green 68 GT fastback/concours driven since 2000. 8f02j - 1-23-68
raven black 66 coupe/concours driven since 1991.6f07c- 5-14-66
rangoon red 65 Mustang JR. go-cart serial#02. not driven much.
Still drive them to the nationals/they do clean up! 
Gold card judge for 67-68 concours class.

Offline sigtauenus

  • Newbie
  • *
  • Posts: 15
Re: 68 deluxe dash emblem placement
« Reply #2 on: July 22, 2010, 04:31:55 PM »
Thanks Much!!