Author Topic: Wanted, shop or person to refinish the bottom side of 67 coupe  (Read 1162 times)

Offline KevinK

  • Hero Member
  • *****
  • Posts: 529
Wanted, shop or person to refinish the bottom side of 67 coupe. Looking to get the bottom side repainted. I already had it pressure washed. Not aware of any rust or damage repair needed. Within 2-3 hours of the Bay Area Ca. I can transport it as a Rolling chassis. Hood, fenders, engine and trans have been removed. The other option is to find someone to rent me a rotisserie. Open to options as well.
MCA #33800, Gold Card 3rd Gen
BAMA Member
67 Coupe, 69 Coupe, 74 Coupe, 84 SVO, 84 GT Turbo, 88 McLaren, 89 LX Sport, 03 Mach 1, 07 GT500, 14 GT/CS

Offline KevinK

  • Hero Member
  • *****
  • Posts: 529
Re: Wanted, shop or person to refinish the bottom side of 67 coupe
« Reply #1 on: June 14, 2017, 03:23:33 PM »
No suggestions?
MCA #33800, Gold Card 3rd Gen
BAMA Member
67 Coupe, 69 Coupe, 74 Coupe, 84 SVO, 84 GT Turbo, 88 McLaren, 89 LX Sport, 03 Mach 1, 07 GT500, 14 GT/CS

Offline J_Speegle

  • Administrator
  • Hero Member
  • *****
  • Posts: 24173
Re: Wanted, shop or person to refinish the bottom side of 67 coupe
« Reply #2 on: June 14, 2017, 07:05:06 PM »
Sorry don't know of a shop in the area that will understand the correct process, order and products needed to reproduce the original look of what ever plant your car was built at including body and pinch weld oversprays.  Have one shop in the Central Valley (I have experience with) that could do it if its a San Jose car (they have done it on another complete restoration. They would likely be able to reproduce the look of the other two plants with some documentation and education.
Jeff Speegle

Anything worth doing is worth doing concours ;)

Offline KevinK

  • Hero Member
  • *****
  • Posts: 529
Re: Wanted, shop or person to refinish the bottom side of 67 coupe
« Reply #3 on: June 15, 2017, 02:11:12 AM »
Thanks Jeff. This car is not special in any way and it's value limited to that of any other decent looking  car. I do not plan to go overboard. Just would like it concours looking and as original looking as possible without the big $$$. It's mostly original but not the engine block. I know shops have long lead times to get in the door. I normally do much of my own work but in this case I want to get the project moving.  All suggestions are appreciated.  I'm out of town in China for a few weeks again, hence the renewed interest in getting it going.
MCA #33800, Gold Card 3rd Gen
BAMA Member
67 Coupe, 69 Coupe, 74 Coupe, 84 SVO, 84 GT Turbo, 88 McLaren, 89 LX Sport, 03 Mach 1, 07 GT500, 14 GT/CS

Offline J_Speegle

  • Administrator
  • Hero Member
  • *****
  • Posts: 24173
Re: Wanted, shop or person to refinish the bottom side of 67 coupe
« Reply #4 on: June 18, 2017, 11:32:17 PM »
PM sent with contact info so you can consider the possibilities
Jeff Speegle

Anything worth doing is worth doing concours ;)