Author Topic: Original 5.0 driveshaft  (Read 2160 times)

Offline 91saleen26

  • Newbie
  • *
  • Posts: 9
Original 5.0 driveshaft
« on: March 18, 2018, 11:51:05 AM »
Does anyone have a picture of an original driveshaft fora 1990 Mustang 5.0. Or know the correct color markings.

Offline KevinK

  • Hero Member
  • *****
  • Posts: 529
Re: Original 5.0 driveshaft
« Reply #1 on: March 18, 2018, 09:28:44 PM »
There is not much in the way of markings on the Foxbodies that I know of. There is a yellow paint spray squirt marking the side for balancing.
MCA #33800, Gold Card 3rd Gen
BAMA Member
67 Coupe, 69 Coupe, 74 Coupe, 84 SVO, 84 GT Turbo, 88 McLaren, 89 LX Sport, 03 Mach 1, 07 GT500, 14 GT/CS

Offline bluemax

  • Full Member
  • ***
  • Posts: 109
Re: Original 5.0 driveshaft
« Reply #2 on: March 25, 2018, 09:06:21 AM »
I can not speak for 1990, but as for all Foxbodies... here is a pic of the underside of an '85.5 SVO.

Please note there are several painted stripes. As Kevin stated, there is a yellow spray mark at the rear end also.

Offline 91saleen26

  • Newbie
  • *
  • Posts: 9
Re: Original 5.0 driveshaft
« Reply #3 on: March 26, 2018, 10:52:58 PM »
Thanks blue max. That Scott is mint.

Offline FoxChassis

  • Newbie
  • *
  • Posts: 16
    • 1979-93 Capri and Mustang Decoders
Re: Original 5.0 driveshaft
« Reply #4 on: April 03, 2018, 01:48:27 PM »
Front stabilizer bar, driveshaft, and rear stabilizer bar (if applicable) all had paint daubs or stripes on them.  Color codes are on the build sheet.  I have quite a few four eyed build sheets and plenty of codes but almost nothing for aero cars.