Author Topic: 09 GT burning oil on startup  (Read 1704 times)

Offline sparky65

  • Sr. Member
  • ****
  • Posts: 414
09 GT burning oil on startup
« on: May 21, 2012, 11:04:30 PM »
I've started to notice that occasionally I get a could of blue smoke when I start the car.  The oil level doesn't seem to go down so I cant be burning a whole lot.  Just wondering if this is normal and if anyone else has noticed it as well.  It is definitely worse if it was sitting for a short period of time after a very short trip.  i.e. re-arranging cars in the driveway.
Steve
1967 Pebble Beige  I6 Coupe built in Metuchen on Oct 26, 1966.
2009 Black GT Coupe

 

Offline bryancobb

  • Silver Level Subscriber
  • Hero Member
  • ****
  • Posts: 1076
  • 2009 Ridn' Around
Re: 09 GT burning oil on startup
« Reply #1 on: May 22, 2012, 08:12:25 AM »
Valve Seals???
1 hour fix from above.  Less than $20.
66 Metuch Conv
Nightmist, Std Blu Int
6T08C223904    76A       K         22       15c     21      6        6
                      BODY  COLOR   TRIM    DATE   DSO   AXLE  XMSN
   C/O  785                                   (rotation #)
   16    C14   6T08C223904        (weld bay 16, bucked MAR 14)

Offline BigB427

  • Newbie
  • *
  • Posts: 40
Re: 09 GT burning oil on startup
« Reply #2 on: May 22, 2012, 03:13:04 PM »
I used to own a 2005 GT that did this from brand new.  I drove it that way until the warranty was almost up and it never really got any worse.  I tried replacing the valve stem seals and it didn't fix it at all. At the time I planned on keeping the car for a long time so I tore into it again and found it was the valve stem clearance was out of spec. I was surprised to say the least, as I've never heard this was a problem on these engines and have seen it on quite a few other cars. Ford's official stance was it was nothing to be concerned with. I went ahead and replaced the cylinder heads under warranty and it fixed the problem and I never had another problem with it.  I do have to say I'm a technician at a Ford dealer, so I don't know if you would be able to get this covered on your car as I got the OK from my service manager to do the repair.
BTW, valve stem seals are definitely not a 1 hour, $20 repair on these engines. Pop the hood and it doesn't seem to be bad, but trust me, they are much more difficult than the 2 valve engines.
Formerly 69 Mach 1 428SCJ w/ 4:30 gears, 69 GT 500 convertible #0018, 69 Boss 429 KK1599, 67 GT500 #0784, and a few others

Online 67gta289

  • Hero Member
  • *****
  • Posts: 1466
Re: 09 GT burning oil on startup
« Reply #3 on: May 22, 2012, 04:33:44 PM »
Have an occasional cloud on my 08 GT.  Have not done any correlation to hot or cold start or other scenario.
John
67 289 GTA Dec 20 1966 San Jose
MCA 74660