ConcoursMustang Forums
1st Generation 1964 1/2 - 1973 - Questions & general discussions that apply to a specific year => 1964 1/2 - 1965 => Topic started by: MustangAndFairlane1867 on November 04, 2017, 02:09:32 PM
-
The passenger door on my Rangoon red 1965 fastback with black interior is not original to the car, most likely replaced by a previous owner after some collision or rust damage to the original door. I know this one is not original because the jams are white and the interior side of the door is a light blue. But the interesting thing I discovered yesterday is that the bolts that attach the door hinge to the door are 5/16" while the bolts on my stock/original driver-side door are 3/8". Both with coarse threads. And another point of interest--all the bolts on both sides of the car that attach the hinges to the A pillars are also 3/8" coarse threads. My first thought is that maybe Ford went to a 5/16" door bolt in 1966 and that my passenger door is, in fact, from a 1966 Mustang. My car has a February build date and the code stamped on the original driver's door appears to be "2 1 2B" while the stamped code on the "mystery" passenger door appears to be "11 4 W3." There are no cosmetic or mechanical issues with the "mystery" door--it looks and fits fine--but I'm curious if anyone else has noticed this difference in the hinge-bolt thread size between 1965 and 1966. Or is there a different explanation for this apparent anomaly? Thanks, Ron.
-
i have know about that anomaly for years. have no idea why the switch.
-
Typical and expected between the production periods. Never met an engineer from the years leading up to 65-66 to ask thwe question and it would be likely they would not have worked on that particular detail
-
Thanks, guys. The anomaly bugged me so much I drilled and tapped the five 5/16" holes to the 1965-correct 3/8" coarse size. All is good now. All planets are aligned. Lol. Ron...
-
Ron,
You might take a few minutes and look in the library under "Mustang Hardware Spreadsheets 64-66" where you will find two files, one by Ford part number and the second by Application/Location. In that file under "Door Hinge-Body" and "Door Hinge-Door" there are two different sizes referenced, the 3/8-16 bolt for 64 and 65, and 5/16-18 for 66. Give it a try. There are over 3,000 entries.
Jim