Author Topic: C4ZB-17A553-C Switch  (Read 2511 times)

Offline Brian Conway

  • Hero Member
  • *****
  • Posts: 1623
C4ZB-17A553-C Switch
« on: March 11, 2015, 07:15:06 PM »
OE windshield washer switch and pump.  I put this same set up on my 65 GT.  You will need the Black w/White pump wire from the switch, see cut off remnant still in the switch, out to the pump.  Swap for most anything 69 or you can come by and pick it up.  Brian
5RO9A GT  4 Spd Built 5/29/65
9TO2R SCJ 4 Spd Built 9/19/68
Owner Driver Mechanic
San Diego, Ca.

Offline NEFaurora

  • Hero Member
  • *****
  • Posts: 970
Re: C4ZB-17A553-C Switch
« Reply #1 on: December 10, 2016, 10:46:44 AM »

Brian, You forgot to mention whether it was for Single Speed or Dual Speed Wipers...

:o)

Tony K.
Tony Kovar (NEFaurora@aol.com)
1965 Mustang Convertible 200 cid 3spd manual
1966 Mustang Convertible Sprint 200 C4 Auto
2007 Mustang Convertible V6 Auto with "Pony Package".
1966 Mustang Sprint 200 Registry Owner/Moderator
MCA#70001

Offline midlife

  • Wiring Guru---let me check your shorts!
  • Global Moderator
  • Hero Member
  • ****
  • Posts: 2155
    • Midlife Harness Restorations
Re: C4ZB-17A553-C Switch
« Reply #2 on: December 10, 2016, 01:37:33 PM »
Brian, You forgot to mention whether it was for Single Speed or Dual Speed Wipers...

 :o )

Tony K.
It is a single speed, based upon the 3 pin molded connector that goes to the wiper motor.  The two speed version has a 4 pin square molded connector.
Midlife Harness Restorations - http://midlifeharness.com