Author Topic: Door panel clips  (Read 138 times)

Offline CCP

  • Jr. Member
  • **
  • Posts: 59
Door panel clips
« on: November 10, 2017, 01:00:37 PM »
Installing new pony door panels in a '66 GT. Question: are the door panel clips different for a standard vs. pony door panel.
 The reason I ask is because I ordered new clips from,,well, a west coast T-bird and Mustang parts supplier, and the new clips are a little shorter than my originals. They are shorter in the 'u' shaped area that slides into the door panel. The new clips land slightly away from the holes in the door frame, and do not line up.
                    Thanks,    Pete.

   
1969 Fairlane Cobra formal roof drag pack
1968 Shelby GT500KR
6F08A-GT,a/c,4-sp.,ps,build date 16A. DSO 24 Jacksonville

Offline rockhouse66

  • Hero Member
  • *****
  • Posts: 654
Re: Door panel clips
« Reply #1 on: November 10, 2017, 07:03:20 PM »
Yes.  They are different.
Jim
'66 GT FB, '69 CJ Grande

Offline rocket289k

  • Sr. Member
  • ****
  • Posts: 326
Re: Door panel clips
« Reply #2 on: November 11, 2017, 06:33:58 PM »
They have a longer shank than the standard door panel clips.  VCM sells both styles.

Regards,


Ron

Offline jwc66k

  • Hero Member
  • *****
  • Posts: 3562
Re: Door panel clips
« Reply #3 on: November 11, 2017, 07:32:40 PM »
AMK sells all styles. You need 6 ea 380552-S100 for the bottom and 7 ea 380552-S60 per door. (The dash numbers are different from the assembly manuals but the clips are the same.) There is a $30 minimum order.
Jim
I promise to be politically correct in all my posts to keep the BBBB from vociferating.

Offline CCP

  • Jr. Member
  • **
  • Posts: 59
Re: Door panel clips
« Reply #4 on: November 13, 2017, 09:16:29 AM »
Super! Thanks for the help guys.

                     Pete.
1969 Fairlane Cobra formal roof drag pack
1968 Shelby GT500KR
6F08A-GT,a/c,4-sp.,ps,build date 16A. DSO 24 Jacksonville