Author Topic: 1967 GT 350 (Early 10/66) Fender Rear Splash Shield L Bracket Finish  (Read 151 times)

Offline cmfuser01

  • Newbie
  • *
  • Posts: 30
What's the correct finish for that bracket? Plated, galvanized, painted?

Thanks.

Online ruppstang

  • Hero Member
  • *****
  • Posts: 2195
Re: 1967 GT 350 (Early 10/66) Fender Rear Splash Shield L Bracket Finish
« Reply #1 on: November 12, 2017, 04:28:37 PM »
Semi Gloss Black

Offline J_Speegle

  • Administrator
  • Hero Member
  • *****
  • Posts: 14378
Re: 1967 GT 350 (Early 10/66) Fender Rear Splash Shield L Bracket Finish
« Reply #2 on: November 12, 2017, 06:12:29 PM »
Anyone have a picture of one in place?
Jeff Speegle

Anything worth doing is worth doing concours ;)

Offline Fastback2013

  • Full Member
  • ***
  • Posts: 173
Re: 1967 GT 350 (Early 10/66) Fender Rear Splash Shield L Bracket Finish
« Reply #3 on: November 14, 2017, 09:14:48 AM »
Hello,

Is it this bracket that you're referring to?
Kind regards,
Jeroen
San Jose 7R02C1708xx
Fastback GTA
built on 01/12/1967

Offline 67gtasanjose

  • Hero Member
  • *****
  • Posts: 2973
  • "Take the MUSTANG PLEDGE"
Re: 1967 GT 350 (Early 10/66) Fender Rear Splash Shield L Bracket Finish
« Reply #4 on: November 14, 2017, 09:27:53 AM »
Hello,

Is it this bracket that you're referring to?
Kind regards,
Jeroen

I thought the same thing when I first read the request for pictures but after re-reading, I believe the request is of the one at the lower end of the splash shield, going over to the fender.
Richard Urch

1967 (11/2/66, S.J.) Luxury Coupe, 289-4V w/Thermactor Emissions, C-4, Well Optioned
2005 (04/05) GT Premium Convertible, Windveil Blue, Parchment Top w/Med. Parchment interior,  Roush Body Appointments

Offline Fastback2013

  • Full Member
  • ***
  • Posts: 173
Re: 1967 GT 350 (Early 10/66) Fender Rear Splash Shield L Bracket Finish
« Reply #5 on: November 14, 2017, 11:36:15 AM »
Hello Richard,

This is the lower bracket (driver side).
If more pictures are needed, let me know.
kind regards,
Jeroen
San Jose 7R02C1708xx
Fastback GTA
built on 01/12/1967

Offline J_Speegle

  • Administrator
  • Hero Member
  • *****
  • Posts: 14378
Re: 1967 GT 350 (Early 10/66) Fender Rear Splash Shield L Bracket Finish
« Reply #6 on: November 14, 2017, 05:25:41 PM »
Hello,

Is it this bracket that you're referring to?
Kind regards,
Jeroen

That's not for the splash shield but for the fender
Thanks for the other picture

Does anyone have a shot with it mounted in place?
Jeff Speegle

Anything worth doing is worth doing concours ;)

Offline Fastback2013

  • Full Member
  • ***
  • Posts: 173
Re: 1967 GT 350 (Early 10/66) Fender Rear Splash Shield L Bracket Finish
« Reply #7 on: November 15, 2017, 05:24:42 AM »
I am clearly lost here  :o
Is there a bracket that holds the rear splash shield?
I thought that the splash shield was held directly in place, with screws and no bracket?
in attachment the rear splash shield still in place.
When it is not these pictures you're searching for, let me know, than I'll delete this post.
kind regards,
Jeroen
San Jose 7R02C1708xx
Fastback GTA
built on 01/12/1967

Offline Bossbill

  • Full Member
  • ***
  • Posts: 103
  • 20 minutes from Pacific Raceways
Re: 1967 GT 350 (Early 10/66) Fender Rear Splash Shield L Bracket Finish
« Reply #8 on: November 17, 2017, 11:08:29 PM »
Keep the post!
The seam sealer pictures are great.
Bill V.
3/2/1967 SJ GT350 and other fastbacks