Author Topic: 3M 8509 obsolete and unabtainable  (Read 1311 times)

Offline HDAshmore

  • Sr. Member
  • ****
  • Posts: 419
Re: 3M 8509 obsolete and unabtainable
« Reply #15 on: February 12, 2024, 06:43:05 PM »
AJ,

 thanks for the BLOG I see it mentioned, now if I can only get the BLOG pics to open up.

Maybe my Gov't computer rules is blocking, I'll try at home later.

Dan


Offline HDAshmore

  • Sr. Member
  • ****
  • Posts: 419
Re: 3M 8509 obsolete and unabtainable
« Reply #16 on: February 14, 2024, 12:20:47 AM »
AJ,

Pics really helped me understand thanks for the blog link. 

I wonder if three tunes are required for 70 mustang or less than that?

Offline Bob Gaines

  • Global Moderator
  • Hero Member
  • ****
  • Posts: 8956
Re: 3M 8509 obsolete and unabtainable
« Reply #17 on: February 16, 2024, 12:13:18 PM »
My link to my local stores shows for store pick up order today and pick up tomorrow for all of them as if it is available. However it says "We apologize this item is not available for shipping at this time. However, this item may be purchased at a NAPA store. If the item is not in stock at your local store, then your store associates can order the item for you. We apologize for the inconvenience. Thank you for shopping at NAPA "- That is as of today in KC.
A week after my initial Napa order I get a phone call with a conflicting double talk explanation why it is not here yet with the end result being they can not get anymore and it is obsolete.
Bob Gaines,Shelby enthusiast, Shelby collector , Shelby concours judge SAAC,MCA,Mid America Shelby

Offline slk25

  • Jr. Member
  • **
  • Posts: 52
Re: 3M 8509 obsolete and unobtainable
« Reply #18 on: February 16, 2024, 05:26:24 PM »
Thank you Bob for following up.
I have run into the same situation in Ohio.
Looks like I will be ordering the C.R. Laurence CRL7708 CRL Windshield and Body Sealant.
 
January 28 1966 Dearborn manufactured hardtop 289 2v 3spd manual

Offline ruppstang

  • Hero Member
  • *****
  • Posts: 3820
Re: 3M 8509 obsolete and unabtainable
« Reply #19 on: February 16, 2024, 09:09:39 PM »
I feel pretty lucky to have found four tubes. I tip that I use when installing glass is to lay a strip of 3M strip calk in the glass grove of the gasket then install the gasket on the glass. Afterward I seat the gasket by taping it with a rubber mallet. This method is less messy and will make the 8509 go further.

Offline RoyceP

  • Hero Member
  • *****
  • Posts: 1472
Re: 3M 8509 obsolete and unabtainable
« Reply #20 on: February 17, 2024, 01:09:07 PM »
A week after my initial Napa order I get a phone call with a conflicting double talk explanation why it is not here yet with the end result being they can not get anymore and it is obsolete.


I did not even get a phone call. I just got an email  that said my order was cancelled due to the item not being available. I guess it will be strip caulk in the future for me.
1968 W code 427 Cougar XR-7 GTE Feb 23 Dearborn C6 / 3.50 open
1968 R code 428CJ Cougar XR-7 May 13 Dearborn C6 / 3.91 T - Lock

Offline ruppstang

  • Hero Member
  • *****
  • Posts: 3820
Re: 3M 8509 obsolete and unabtainable
« Reply #21 on: February 17, 2024, 08:51:31 PM »
I found out today that there is another brand available. It is CRL windshield and body sealant.  Walmart has it for $14.
« Last Edit: February 17, 2024, 08:55:10 PM by ruppstang »

Offline RoyceP

  • Hero Member
  • *****
  • Posts: 1472
Re: 3M 8509 obsolete and unabtainable
« Reply #22 on: February 17, 2024, 08:55:05 PM »
I found out today that there is another brand available. It is CNL windshield and body sealant.


Is there a part number?
1968 W code 427 Cougar XR-7 GTE Feb 23 Dearborn C6 / 3.50 open
1968 R code 428CJ Cougar XR-7 May 13 Dearborn C6 / 3.91 T - Lock

Offline 67gtasanjose

  • Hero Member
  • *****
  • Posts: 5084
  • "Take the MUSTANG PLEDGE"
Richard Urch

1967 (11/2/66, S.J.) GTA Luxury Coupe, 289-4V w/Thermactor Emissions, C-4, Int./Ext. Decor +many options

2005 (04/05) GT Premium Convertible, Windveil Blue, Parchment Top w/Med. Parchment interior,  Roush Body Appointments

Offline HDAshmore

  • Sr. Member
  • ****
  • Posts: 419
Re: 3M 8509 obsolete and unabtainable
« Reply #24 on: February 18, 2024, 11:37:53 AM »
Team, 

I saw the CRL advertised as well.  It appears to be same product just not sure.  I found six tubes total of the 3M 08509 by calling every auto parts store in my surrounding county.  They were all old stock on back shelves.  Anywhere from $18-24 a tube.  I recommend checking window installer places as well.  They sometimes sell stuff like that if you tell them your dilemma.  Hopefully someone will report how the CCRL compares.  I'm too far away from time to use any to be of help.

Dan in kansas

Offline RoyceP

  • Hero Member
  • *****
  • Posts: 1472
Re: 3M 8509 obsolete and unabtainable
« Reply #25 on: February 18, 2024, 04:11:18 PM »
I ordered three tubes of the CRL7708 on Amazon. I will not use it until maybe May or June but it looks like the same stuff as the unavailable 3M product. 
1968 W code 427 Cougar XR-7 GTE Feb 23 Dearborn C6 / 3.50 open
1968 R code 428CJ Cougar XR-7 May 13 Dearborn C6 / 3.91 T - Lock

Offline CharlesTurner

  • Charles Turner
  • Administrator
  • Hero Member
  • *****
  • Posts: 7614
Re: 3M 8509 obsolete and unabtainable
« Reply #26 on: February 18, 2024, 07:23:54 PM »
The CRL stuff looks like the tube version of 3M strip caulk... the sticky butyl type.


I ordered a few tubes a while back but haven't used any.
Charles Turner - MCA/SAAC Judge
Concours Mustang Forum Admin