ConcoursMustang Forums
1st Generation 1964 1/2 - 1973 - Questions & general discussions that apply to a specific year => 1968 Mustang => Topic started by: mhubert89 on October 12, 2017, 01:42:47 AM
-
Hi !
I have somes questions about my wiring harness and parts number for clips that i need to buy !
First picture its the red plug on passager side, what is for ??
2nd picture its a black plug in the cluster harness i think , what plug there ?
3nd picture its a ground that its screw to the wiper motor bracket , what plug there also ?
Now for clips and screw ... can we find thoses clips ?
372302-s100
42127-536
372303-s100
382349-s
Thanks everyone for help
Mathieu
-
First picture: probably for a overhead courtesy lamp; most are left unused.
Second picture: for optional fog lamp feed for rear running lights. Most are left unused.
Third picture: on a 1968, there is only one ground from the underdash harness itself. If your accessory harnesses require a ground, you can use that point as well.
-
Any chance the wiper motor bracket was swapped out? I believe the ac blower motor grounds there.
-
First picture: probably for a overhead courtesy lamp; most are left unused.
Second picture: for optional fog lamp feed for rear running lights. Most are left unused.
Third picture: on a 1968, there is only one ground from the underdash harness itself. If your accessory harnesses require a ground, you can use that point as well.
You are probably the best guys to answer this because you redone this harness ! Thanks
-
Any chance the wiper motor bracket was swapped out? I believe the ac blower motor grounds there.
I reused the same bracket that i remove in my car and its not a a/c car but who know if they change it and the past ... thanks !
-
First picture: probably for a overhead courtesy lamp; most are left unused.
Second picture: for optional fog lamp feed for rear running lights. Most are left unused.
Third picture: on a 1968, there is only one ground from the underdash harness itself. If your accessory harnesses require a ground, you can use that point as well.
For the first picture , if i have a overhead console i will need to plug the harness there ?
-
I have somes questions about my wiring harness and parts number for clips that i need to buy !
First picture its the red plug on passager side, what is for ??
2nd picture its a black plug in the cluster harness i think , what plug there ?
3nd picture its a ground that its screw to the wiper motor bracket , what plug there also ?
You really need to get a set of Osborn Mustang Assembly Manuals for your car. That's where I would look for the answers to your questions.
Now for clips and screw ... can we find thoses clips ?
372302-s100
42127-536
372303-s100
382349-s
AMK (similar to 372303-S100)
AMK
AMK
A single use item, not reproduced.
Jim