Author Topic: 68 trunk wheel well seam cover  (Read 2847 times)

Offline cjmustangman

  • Jr. Member
  • **
  • Posts: 81
68 trunk wheel well seam cover
« on: September 10, 2012, 06:57:52 PM »
Is the trunk wheel well seam cover on the drivers side supposed to be grey in color ?
If so anyone know where to purchase the grey ones ?
I've only seen black ones for sale.
Thanks
Arild

Offline J_Speegle

  • Administrator
  • Hero Member
  • *****
  • Posts: 24218
Re: 68 trunk wheel well seam cover
« Reply #1 on: September 10, 2012, 08:49:06 PM »
It appears that the color (not always) depended on the supplier so in turn it depends on the plant - what color the luggage protector is.

Currently the gray style (typically seen on NJ and Dearborn later cars) is not being reproduced so used is your only option. Believe you have a 68 NJ or 69 Dearborn car - sorry you didn't list it
Jeff Speegle

Anything worth doing is worth doing concours ;)

Offline cjmustangman

  • Jr. Member
  • **
  • Posts: 81
Re: 68 trunk wheel well seam cover
« Reply #2 on: September 10, 2012, 11:50:00 PM »
thanks Jeff, car is a 68 1/2 San Jose car, so if I use the black repro I should expect a deduction, correct
Arild
 

Offline J_Speegle

  • Administrator
  • Hero Member
  • *****
  • Posts: 24218
Re: 68 trunk wheel well seam cover
« Reply #3 on: September 11, 2012, 12:39:51 AM »
thanks Jeff, car is a 68 1/2 San Jose car, so if I use the black repro I should expect a deduction, correct

Sorry I didn't make it clear - I believe if a judge is looking for a specific color for a 67-70 then it would go as follows

Grey - Dearborn and NJ

Black - San Jose

Hope this makes that clear. For the record I have seen a couple of San Jose 68's with grey in the earlier part of the year

Remember that they were attached to the car with a sloppy wipe of a paint brush with adhesive. The yellow weatherstrip sort of stuff

Here are some 68 San Jose pictures - unfortunately most cars have these missing and I noticed that I often take pictures of the car after I have removed it and put it in my bag ;)  - at yards




Worker "missed" his attempted application.




Just about all the cars have a spot on the trunk floor where the worker either dripped or wiped the brush - or maybe both. Can be seen in the first picture also




Another shot of the adhesive application -  more on target


Jeff Speegle

Anything worth doing is worth doing concours ;)

Offline cjmustangman

  • Jr. Member
  • **
  • Posts: 81
Re: 68 trunk wheel well seam cover
« Reply #4 on: September 11, 2012, 12:55:33 PM »
Jeff, great pic's showing detail and explanation.
thanks again
Arild

Offline Dudley

  • Full Member
  • ***
  • Posts: 169
Re: 68 trunk wheel well seam cover
« Reply #5 on: September 11, 2012, 02:46:56 PM »
My SJ June '68 build is grey........I've been trying to find the significance of the paper stuck to the wheelhouse, from what I have read In Mustang Monthly, Mustang Magazine, and an article written by Kevin Marti, some of the numbers refer to paint specs or identifcation,
« Last Edit: September 11, 2012, 03:37:34 PM by Dudley »
sold my sig pix Mustang to Marcus Anghel in Sept 2017 -- 1968 Mustang coupe 11,900 mile unrestored-June 19,1968 SJ build. ON COVER OF MCA MUSTANG TIMES APRIL 2018 with feature article. My personal Pix available at :  http://www.allfordmustangs.com/photopost/showphoto.php/photo/137299/ppuser

Offline Scott Fuller

  • Full Member
  • ***
  • Posts: 117
    • Scott Fuller Reproductions
Re: 68 trunk wheel well seam cover
« Reply #6 on: September 13, 2012, 08:03:10 PM »
Arild,

All three of my SJ built CJ Mustangs have gray trunk protectors.

Scott
68 "135" Mustang, 68.5 Blck Mustang CJ Cnvrt, 68 Rd HCS (fact 428), 68 Ac Bl Mustang GT Cnvrt, 68 Ylw GT500KR Cnvrt, 68 Hlnd Grn GT500KR Cnvrt, 68 Gld G.T. 500 Cnvrt, 68 Ryl Maroon Mustang Sprint Cpe, 68.5 Hlnd Grn Fstbck, 68.5 Ylw Mustang Fstbck. Visit my website www.scottfullerreproductions.com

Offline rockhouse66

  • Hero Member
  • *****
  • Posts: 929
Re: 68 trunk wheel well seam cover
« Reply #7 on: September 13, 2012, 08:45:53 PM »
Arild,

All three of my SJ built CJ Mustangs have gray trunk protectors.

Scott

And just to foul up Jeff's stats, so does my 3/69 built SJ Mustang.
Jim
'66 GT FB

Offline J_Speegle

  • Administrator
  • Hero Member
  • *****
  • Posts: 24218
Re: 68 trunk wheel well seam cover
« Reply #8 on: September 13, 2012, 09:05:03 PM »
And just to foul up Jeff's stats, so does my 3/69 built SJ Mustang.


Nope those don't (including the others)   Out of maybe 5,000 ones I've seen the black is still the most common ones found on 67-70 San Jose Mustangs. Example - yesterday visited a local yard - pulled 18 of them - only one was a gray one ;) Will report that it seems that I find more grey ones during 68 at San Jose when compared to the other years

Could use each of the VIN's for these cars (pm if you want) so they can be added (along with the specific detail) to the spreadsheet. Only if you want. Guess I need to get the later years started  :)
« Last Edit: September 13, 2012, 10:37:35 PM by J_Speegle »
Jeff Speegle

Anything worth doing is worth doing concours ;)