Author Topic: 70 B302 15x7" steel wheels  (Read 3703 times)

Offline 67gta289

  • Hero Member
  • *****
  • Posts: 3041
70 B302 15x7" steel wheels
« on: January 21, 2020, 09:50:38 PM »
I have a line on some 1970 Boss 302 15x7" standard steel wheels, part# D0OZ-1007-A.   Can anyone help with the telltales of the proper wheel, so that I don't get taken by a close alternative?  I'm thinking about backspace measurement and diameter of hub hole, things like that.  Thanks in advance. John
John
67 289 GTA Dec 20 1966 San Jose
7R02C156xxx
MCA 74660

Re: 70 B302 15x7" steel wheels
« Reply #1 on: August 14, 2021, 01:23:48 AM »
Did you ever find the info you were looking for? I have the same question. I know the 1971 15x7 wheels (Boss 351 & mach 1 as an option IIRC) are not "correct" for a 1970 Boss 302 but wouldn't they still be the same wheel but with different part number? Same for the 15x7 wheels that were on Torino or Fairlane?

Offline 70cj428

  • Sr. Member
  • ****
  • Posts: 309
Re: 70 B302 15x7" steel wheels
« Reply #2 on: October 09, 2021, 10:30:30 PM »
If I'm not mistaken, these wheels were used on 70 Boss 302's, 1971 Boss 351's, and as an optional wheel on 70/71 Torinos and are all identical except for the date code. An easy way to spot them is that they have a solid center without the 4 openings between the center and the wheel rim, and as far as I know they are the only 15 x 7 Ford bolt pattern wheel that use this center. They are tough to find as not many Torinos were optioned with them and they are really in demand with the Boss 302/351 guys.

Heres a pic from the Classic Cougar site that shows the center without the openings, and another pic of incorrect wheels that shows the opening I'm talking about.

Offline Bossbill

  • Hero Member
  • *****
  • Posts: 3250
  • In the middle of project hell
Re: 70 B302 15x7" steel wheels
« Reply #3 on: October 10, 2021, 02:33:11 PM »
I understand we are talking about the wheel "eyes" or lack thereof but the first wheel has three hubcap nubs and is valid through 1967. It's a T-bird wheel.
The second has just a standard "D" shaped eye and it too is 1967 or earlier due to the three hubcap nubs.
When looking for a wheel for 1968 or later always see if the wheel has 4 hubcap nubs.
There are also 15x7 wheels with no eyes and have no nubs at all. Those are either T-Bird or Crown Vic.
Bill
Concours  Actual Ford Build 3/2/67 GT350 01375
Driven      6/6/70 0T02G160xxx Boss 302
Modified   5/18/65 5F09A728xxx 347 Terminator-X 8-Stack
Race        65 2+2 Coupe conversion

Offline Anghelrestorations

  • Hero Member
  • *****
  • Posts: 1140
    • Anghel Restorations
Re: 70 B302 15x7" steel wheels
« Reply #4 on: October 12, 2021, 03:19:10 AM »
Here is photos of correct wheels for a 1970 Boss 302...these are Kelsey Hayes wheels.  Front and back so you can see with correct paint markings on the back side. 

20211011_155320 by Marcus Anghel, on Flickr

20211011_155308 by Marcus Anghel, on Flickr

20211011_155348 by Marcus Anghel, on Flickr

20211011_155357 by Marcus Anghel, on Flickr

20211011_155421 by Marcus Anghel, on Flickr

Marcus Anghel
MCA National Gold Card Judge, 69-71 Mustang
SAAC National Head Judge, Boss Mustangs

www.anghelrestorations.com
www.facebook.com/anghelrestorations
www.instagram.com/anghelrestorations