Author Topic: Metuchen Radiator Cap?  (Read 2597 times)

Offline wm3798

  • Newbie
  • *
  • Posts: 3
Metuchen Radiator Cap?
« on: September 21, 2014, 11:17:37 AM »
Asked this question over on the Boss 302 site with no responses. Its pretty well documented what the Dearborn plant radiator cap looks like but I haven't seen much on what the Metuchen plant used. Did they use the same supplier/ same cap or something different. (pic is the Dearborn radiator cap)

Offline J_Speegle

  • Administrator
  • Hero Member
  • *****
  • Posts: 24241
Re: Metuchen Radiator Cap?
« Reply #1 on: September 21, 2014, 06:16:19 PM »
Looked through my pictures and it is very rare to find an original still on the car after all these years.

Could not find a single NJ car (just what I have pictures of) with the small rivet cap on it. Have a half dozen reportably "unrestored" cars though most have been played with in some way making IMHO trusting what I see difficult


Tried :(
Jeff Speegle

Anything worth doing is worth doing concours ;)

Offline specialed

  • Hero Member
  • *****
  • Posts: 1060
Re: Metuchen Radiator Cap?
« Reply #2 on: September 21, 2014, 09:10:11 PM »
the regular big rivet autolite cap from what I seen  another vendor thing with small rivet Dearborn car

Offline Brian Conway

  • Hero Member
  • *****
  • Posts: 1623
Re: Metuchen Radiator Cap?
« Reply #3 on: September 21, 2014, 10:31:09 PM »
     This is the reproduction chrome cap I got for my car.  Of course under the impression it was a faithful copy of the original.  Will be interested to see how faithful that might be.  Brian
« Last Edit: September 21, 2014, 10:40:31 PM by Brian Conway »
5RO9A GT  4 Spd Built 5/29/65
9TO2R SCJ 4 Spd Built 9/19/68
Owner Driver Mechanic
San Diego, Ca.

Offline 69cobrajetrugae2

  • Sr. Member
  • ****
  • Posts: 302
Re: Metuchen Radiator Cap?
« Reply #4 on: September 22, 2014, 04:31:59 AM »

Offline J_Speegle

  • Administrator
  • Hero Member
  • *****
  • Posts: 24241
Re: Metuchen Radiator Cap?
« Reply #5 on: September 22, 2014, 05:20:58 AM »
The seller may provide better pictures if asked to do so.  The center rivet looks different than the repo.


Looks like a later service replacement

Its most likely (going by past example sand practices) that the reproducers used NOS/service replacements as their guide when making the new ones


Notice the differences between the following








« Last Edit: September 22, 2014, 05:40:02 AM by J_Speegle »
Jeff Speegle

Anything worth doing is worth doing concours ;)

Offline 67gtasanjose

  • Hero Member
  • *****
  • Posts: 5086
  • "Take the MUSTANG PLEDGE"
Re: Metuchen Radiator Cap?
« Reply #6 on: September 22, 2014, 06:44:00 AM »
I noticed the FONT size is different on the OE cap, there is a larger gap between the arrows.

Richard
« Last Edit: September 22, 2014, 06:47:08 AM by 67gtasanjose »
Richard Urch

1967 (11/2/66, S.J.) GTA Luxury Coupe, 289-4V w/Thermactor Emissions, C-4, Int./Ext. Decor +many options

2005 (04/05) GT Premium Convertible, Windveil Blue, Parchment Top w/Med. Parchment interior,  Roush Body Appointments

Offline 69cobrajetrugae2

  • Sr. Member
  • ****
  • Posts: 302
Re: Metuchen Radiator Cap?
« Reply #7 on: September 22, 2014, 07:58:00 AM »
Send me a personal message jeff, I don't know how to do it. Thanks

Offline Bob Gaines

  • Global Moderator
  • Hero Member
  • ****
  • Posts: 9009
Re: Metuchen Radiator Cap?
« Reply #8 on: September 22, 2014, 10:36:21 AM »
The seller may provide better pictures if asked to do so.  The center rivet looks different than the repo.

http://www.ebay.com/itm/1965-74-Ford-Mustang-Torino-Shelby-c9zz-8100-a-radiator-cap-/370807478657?pt=Vintage_Car_Truck_Parts_Accessories&hash=item5655d91981&vxp=mtr
That cap is marked Motorcraft not Autolite. It is the evolved service version.
Bob Gaines,Shelby enthusiast, Shelby collector , Shelby concours judge SAAC,MCA,Mid America Shelby

Offline 69cobrajetrugae2

  • Sr. Member
  • ****
  • Posts: 302
Re: Metuchen Radiator Cap?
« Reply #9 on: September 22, 2014, 12:10:59 PM »
Thanks Bob. I thought I found a gold mine part one of you might want. I wasn't sure about the motorcraft label.