ConcoursMustang Forums

Marketplace => Parts for Sale => Topic started by: 67gtasanjose on August 10, 2018, 01:57:47 PM

Title: 5/16 " crimp-type hose clamps by OEM supplier
Post by: 67gtasanjose on August 10, 2018, 01:57:47 PM: These hose clamps have the original equipment maker mark as seen in picture attached. They are also stamped with the .590 diameter marking and do not have the dimple in the crimp Zone like the reproductions available today.

I believe these are perfect for all of your early Mustangs that have 5/16 fuel hoses on them. It is also correct for the differential vent hose.

PM me here on CM forum an offer of $2 each clamp, plus $3 shipping to the US-48 states

If you need larger quantities, private message me. We can work something out or go on eBay and make an offer (see what offers will be accepted below).

$15 for 6 on eBay, includes Continental US shipping FREE.

Make offer with note on quantity desired for larger quantities of more than 6. Calculate them at quantities 50 -99 at $1.50 each (plus $5 shipping in the US-48) and quantities over 100 for $1.00 each (also, plus $5 shipping for US-48 states). You can also ask me for a special ebay listing, I'll make one up just for you if this is too confusing.

International sales and outside the US-48 states, ONLY available throgh eBays GLOBAL SHIPPING.

Current eBay listing: https://www.ebay.com/itm/232919664499
Title: Re: 5/16 " crimp-type hose clamps by OEM supplier
Post by: 67gtasanjose on August 11, 2018, 07:10:30 AM: Link to eBay now added to original post, will ship overseas ONLY through eBay's Global program.

Larger quantities over quantity of 6 can be negotiated on a case-by-case situation (pending quantity). I have a fairly large quantity on hand but I CANNOT re-stock these so when they are gone, they are gone. I have already sold a large number of these so do not miss your chance.
Title: Re: 5/16 " crimp-type hose clamps by OEM supplier
Post by: 67gtasanjose on August 17, 2018, 08:08:17 AM: I have sold many of the clamps already and I still have many more available, even in larger quantities.

Feedback coming back as 100% positive by all members of this forum and all sales so far on eBay. These will not disappoint.

Easiest to process all orders on eBay (for all of us) but any "better deals", should you need or want a larger quantity...are better if processed here through private messaging. (less fees equates to better deals ;)

FAST delivery within the 48 states, unknown how long it takes if overseas but I will sell outside the contiguous 48 states ONLY through eBay.

~Thanks for everyone who has already purchased some.

NOTE: Any and all proceeds will be donated to a worthy cause...my '67. Those $2 transactions do add up!
Title: Re: 5/16 " crimp-type hose clamps by OEM supplier
Post by: 67gtasanjose on August 24, 2018, 06:58:02 AM: Bump

Still many clamps left. Price is affordable including shipping costs.

Thank you to everyone who have purchased them. Like last week, I have had zero complaints, no disappointed buyers.

I checked the clamp provided in Dead Nuts On's axle vent hose kit and see he is providing a clamp that is close to original but no "maker's Mark. I also looked at the original clamp that I removed from my 67 vent hose and see this is a PERFECT MATCH to that one. These clamps are also a PERFECT MATCH to the hose clamps found in my old AUTOLITE Fuel Filter kits. These ARE the right clamps.
Title: Re: 5/16 " crimp-type hose clamps by OEM supplier
Post by: 67gtasanjose on August 31, 2018, 09:45:05 AM: I still have many more left.

You 65 thru 67 guys should be eating these up! Many have already! (thanks all!)

INTERNATIONAL SHIPPING TOO!
Title: Re: 5/16 " crimp-type hose clamps by OEM supplier
Post by: Bossbill on August 31, 2018, 01:58:47 PM: Quote from: 67gtasanjose on August 31, 2018, 09:45:05 AM
I still have many more left.

You 65 thru 67 guys should be eating these up! Many have already! (thanks all!)

INTERNATIONAL SHIPPING TOO!

Burp!
I like 'em. Don't wait until they are gone and wish you had bought a few.
That's my usual MO.
Title: Re: 5/16 " crimp-type hose clamps by OEM supplier
Post by: 67gtasanjose on September 07, 2018, 06:36:48 AM: I still have a few hundred of these left at this time.

Response has been great, feedback is 100% satisfaction.

Quantity of 6: $15 with free shipping in the US-48, international shipping as shown in listing: https://www.ebay.com/itm/NOS-VINTAGE-HOSE-CLAMPS-Fits-5-16-i-d-fuel-hose-Ford-Mustang-Cougar-and-Dodge/232883031230?hash=item3638e90cbe%3Ag%3A0%7EAAAOSwJkNbbqjl&_sop=10&_sacat=6028&_nkw=mustang+nos+clamp&_from=R40&rt=nc&_trksid=m570.l1313&LH_TitleDesc=0#shId

Buyer bought out the quantity on hand for previous listing. New listing here: https://www.ebay.com/itm/232919664499

Quantities of 6 to 50 clamps, make offer in eBay listing or in private messaging.

Quantities of 50 to 99 for $1.50 each (plus actual shipping) pm me for details

Quantities of 100 or more for $1.00 each (plus actual shipping) pm me for details

Again, thank you everyone for the response to these clamps. The quantity left is reducing fast and will only be available till I run out of what I have on hand.
Title: Re: 5/16 " crimp-type hose clamps by OEM supplier
Post by: 70cj428 on September 07, 2018, 07:37:39 AM: Hi Rich,
PM sent
Title: Re: 5/16 " crimp-type hose clamps by OEM supplier
Post by: 67gtasanjose on September 07, 2018, 03:05:06 PM: Today, a buyer bought the quantity shown available in the listing ultimately causing me to "Relist" the item instead of revising it. New listing relisted at: https://www.ebay.com/itm/232919664499

Thanks again everyone
Title: Re: 5/16 " crimp-type hose clamps by OEM supplier
Post by: 67gtasanjose on September 14, 2018, 10:09:04 AM: BUMP

Again, it's FRIDAY! Just a friendly reminder about the clamps. See eBay listing https://www.ebay.com/itm/232919664499 for pictures and if you want more than 6 (or less than 6 even)
just pm me. We'll work something out.
Title: Re: 5/16 " crimp-type hose clamps by OEM supplier
Post by: 67gtasanjose on September 21, 2018, 10:39:39 AM: another Friday Bump...

These hose clamps have the original equipment maker mark as seen in picture attached in initial post and at ebay listing. They are also stamped with the .590 diameter marking and do not have the dimple in the crimp Zone like the reproductions available today.

I believe these are perfect for all of your early Mustangs that have 5/16 fuel hoses on them. It is also correct for the differential vent hose.

PM me here on CM forum an offer of $2 each clamp, plus $3 shipping to the US-48 states

If you need larger quantities, private message me. We can work something out or go on eBay and make an offer (see what offers will be accepted below).

$15 for 6 on eBay, includes Continental US shipping FREE.

Make offer with note on quantity desired for larger quantities of more than 6. Calculate them at quantities 50 -99 at $1.50 each (plus $5 shipping in the US-48) and quantities over 100 for $1.00 each (also, plus $5 shipping for US-48 states). You can also ask me for a special ebay listing, I'll make one up just for you if this is too confusing.

International sales and outside the US-48 states, ONLY available throgh eBays GLOBAL SHIPPING.

Current eBay listing: https://www.ebay.com/itm/232919664499
Title: Re: 5/16 " crimp-type hose clamps by OEM supplier
Post by: sanluis09 on October 23, 2018, 06:11:31 PM: Hi Richard,

I have sent you an offer through Ebay. Let me know as soon as you can.

Thank you,
sanluis09

Quote from: 67gtasanjose on September 21, 2018, 10:39:39 AM
another Friday Bump...

These hose clamps have the original equipment maker mark as seen in picture attached in initial post and at ebay listing. They are also stamped with the .590 diameter marking and do not have the dimple in the crimp Zone like the reproductions available today.

I believe these are perfect for all of your early Mustangs that have 5/16 fuel hoses on them. It is also correct for the differential vent hose.

PM me here on CM forum an offer of $2 each clamp, plus $3 shipping to the US-48 states

If you need larger quantities, private message me. We can work something out or go on eBay and make an offer (see what offers will be accepted below).

$15 for 6 on eBay, includes Continental US shipping FREE.

Make offer with note on quantity desired for larger quantities of more than 6. Calculate them at quantities 50 -99 at $1.50 each (plus $5 shipping in the US-48) and quantities over 100 for $1.00 each (also, plus $5 shipping for US-48 states). You can also ask me for a special ebay listing, I'll make one up just for you if this is too confusing.

International sales and outside the US-48 states, ONLY available throgh eBays GLOBAL SHIPPING.

Current eBay listing: https://www.ebay.com/itm/232919664499
Title: Re: 5/16 " crimp-type hose clamps by OEM supplier
Post by: 67gtasanjose on October 23, 2018, 07:47:04 PM: Thank you.
Title: Re: 5/16 " crimp-type hose clamps by OEM supplier
Post by: Bossman963 on November 06, 2018, 11:28:20 AM: Richard just bought 2 set on Ebay
Title: Re: 5/16 " crimp-type hose clamps by OEM supplier
Post by: 67gtasanjose on November 06, 2018, 12:04:34 PM: Packed up and ready to go. I will drop off at USPS in a few minutes from now.

Thank you and thank you all who have purchased these clamps. I think I am well over 1/2 way through what I started with.
Title: Re: 5/16 " crimp-type hose clamps by OEM supplier
Post by: Bossman963 on November 06, 2018, 12:14:40 PM: Richard thx much for the info ;D
Title: Re: 5/16 " crimp-type hose clamps by OEM supplier
Post by: 67gtasanjose on November 23, 2018, 11:36:34 AM: ***BLACK FRIDAY SALE THRU MIDNIGHT SUNDAY (eastern time)

Lower Price OFFERS ACCEPTED THIS WEEKEND on larger quantities!

FREE SHIPPING THIS WEEKEND (lower 48 states only)on quantities of 20-or more
Title: Re: 5/16 " crimp-type hose clamps by OEM supplier
Post by: 67gtasanjose on August 30, 2021, 06:33:33 PM: The DEAL IS OVER. Nearly sold out.

I have ONLY 10 LEFT that I will part with but I will sell 2 sets of 5 for a total of $25 per set of 5. Includes Free shipping to lower 48 states only.