« previous next »
Pages: 1 [2]   Go Down

Author Topic: Reinstalling Cowl Panel, Use Foam Support Blocks or Not?  (Read 9821 times)

Offline drummingrocks

  • Hero Member
  • *****
  • Posts: 1291
Re: Reinstalling Cowl Panel, Use Foam Support Blocks or Not?
« Reply #15 on: July 19, 2011, 11:16:29 PM »
Quote from: J_Speegle on July 19, 2011, 08:22:44 PM
Not sure if they originally had peel and stick on them but think many restorers were like to have it there just to save a step and those picky guys ;) would likely overlook the improvement

+1, It would be very convenient to have a peel and stick surface, but either way would ultimately be fine.
Logged
Too much junk, too little time.

Offline sah62

  • Sr. Member
  • ****
  • Posts: 297
    • Mustang 428 Cobra Jet Registry
Re: Reinstalling Cowl Panel, Use Foam Support Blocks or Not?
« Reply #16 on: July 26, 2011, 08:50:39 AM »
I've placed an order with a manufacturer.  I won't see a pre-production sample until approximately 10 August so it'll probably be another month before I have the pads in stock and ready for sale.  They'll be 3.5" x 1.5" x 1.25" and made from black SCE-43 closed cell neoprene sponge rubber with adhesive.
Logged
Scott Hollenbeck
Administrator, Mustang 428 Cobra Jet Registry
Owner, Muscle Car Research LLC
1970 Calypso Coral R-Code Mach 1 (10/69 T)
2019 Lincoln MKZ 3.0T AWD
2003 Mercury Marauder 300A
(more non-Ford stuff)

Offline J_Speegle

  • Administrator
  • Hero Member
  • *****
  • Posts: 24232
Re: Reinstalling Cowl Panel, Use Foam Support Blocks or Not?
« Reply #17 on: July 26, 2011, 09:22:44 PM »
Scott thanks for keeping us informed - its great to see another item produced
Logged
Jeff Speegle

Anything worth doing is worth doing concours ;)

Offline drummingrocks

  • Hero Member
  • *****
  • Posts: 1291
Re: Reinstalling Cowl Panel, Use Foam Support Blocks or Not?
« Reply #18 on: July 27, 2011, 05:46:09 PM »
Quote from: J_Speegle on July 26, 2011, 09:22:44 PM
Scott thanks for keeping us informed - its great to see another item produced

+1.  Please let us know when these are available!
Logged
Too much junk, too little time.

Offline drummingrocks

  • Hero Member
  • *****
  • Posts: 1291
Re: Reinstalling Cowl Panel, Use Foam Support Blocks or Not?
« Reply #19 on: September 05, 2011, 01:13:24 PM »
Any update or possible availability of these?  I still need a set.
Logged
Too much junk, too little time.

Offline sah62

  • Sr. Member
  • ****
  • Posts: 297
    • Mustang 428 Cobra Jet Registry
Re: Reinstalling Cowl Panel, Use Foam Support Blocks or Not?
« Reply #20 on: September 05, 2011, 02:22:10 PM »
I'm still waiting for my manufacturer to come through.  I rejected the first proofs because of a quality issue and they had to start over.  I hope to have the second proofs soon.
Logged
Scott Hollenbeck
Administrator, Mustang 428 Cobra Jet Registry
Owner, Muscle Car Research LLC
1970 Calypso Coral R-Code Mach 1 (10/69 T)
2019 Lincoln MKZ 3.0T AWD
2003 Mercury Marauder 300A
(more non-Ford stuff)

Offline sah62

  • Sr. Member
  • ****
  • Posts: 297
    • Mustang 428 Cobra Jet Registry
Re: Reinstalling Cowl Panel, Use Foam Support Blocks or Not?
« Reply #21 on: September 23, 2011, 08:00:51 AM »
I received my second set of production samples yesterday and gave approval to produce the full order.  I hope to have the pads in stock within a week.
Logged
Scott Hollenbeck
Administrator, Mustang 428 Cobra Jet Registry
Owner, Muscle Car Research LLC
1970 Calypso Coral R-Code Mach 1 (10/69 T)
2019 Lincoln MKZ 3.0T AWD
2003 Mercury Marauder 300A
(more non-Ford stuff)

Offline drummingrocks

  • Hero Member
  • *****
  • Posts: 1291
Re: Reinstalling Cowl Panel, Use Foam Support Blocks or Not?
« Reply #22 on: September 23, 2011, 10:28:57 AM »
Quote from: sah62 on September 23, 2011, 08:00:51 AM
I received my second set of production samples yesterday and gave approval to produce the full order.  I hope to have the pads in stock within a week.

Great!  Please let us know when they're ready for sale.  I still need a set.
Logged
Too much junk, too little time.

Offline sah62

  • Sr. Member
  • ****
  • Posts: 297
    • Mustang 428 Cobra Jet Registry
Re: Reinstalling Cowl Panel, Use Foam Support Blocks or Not?
« Reply #23 on: September 30, 2011, 12:28:40 PM »
I have the pads in stock and ready to go!  I'll post a "for sale" topic in the appropriate forum in a moment.
Logged
Scott Hollenbeck
Administrator, Mustang 428 Cobra Jet Registry
Owner, Muscle Car Research LLC
1970 Calypso Coral R-Code Mach 1 (10/69 T)
2019 Lincoln MKZ 3.0T AWD
2003 Mercury Marauder 300A
(more non-Ford stuff)

Offline drummingrocks

  • Hero Member
  • *****
  • Posts: 1291
Re: Reinstalling Cowl Panel, Use Foam Support Blocks or Not?
« Reply #24 on: October 05, 2011, 06:56:45 PM »
Ordered a set late yesterday.  Thanks, Scott!
Logged
Too much junk, too little time.

Offline Dave Stahl

  • Newbie
  • *
  • Posts: 4
    • Dave's Mustangs
Re: Reinstalling Cowl Panel, Use Foam Support Blocks or Not?
« Reply #25 on: October 08, 2011, 08:31:58 PM »
Just received my blocks, thanks Scott for having them made, and the quick shipping.
Logged
1967 GT-500 Brittany Blue, Auto ,Magstars
1967 Convertible Custom 428CJ EFI 5 speed
1969 Sportsroof Custom 392 Crate, 5 speed
1969 428CJ R code 4speed Concours T-Queen
1970 Convertible 351W Auto Calypso/wht/wht

Offline sah62

  • Sr. Member
  • ****
  • Posts: 297
    • Mustang 428 Cobra Jet Registry
Re: Reinstalling Cowl Panel, Use Foam Support Blocks or Not?
« Reply #26 on: October 08, 2011, 10:43:00 PM »
You're welcome, guys!
Logged
Scott Hollenbeck
Administrator, Mustang 428 Cobra Jet Registry
Owner, Muscle Car Research LLC
1970 Calypso Coral R-Code Mach 1 (10/69 T)
2019 Lincoln MKZ 3.0T AWD
2003 Mercury Marauder 300A
(more non-Ford stuff)
Pages: 1 [2]   Go Up
« previous next »