Recent Posts

1

1970 Mustang / Re: 70 428CJ Question about emissions sticker

« Last post by 70cj428 on Today at 01:51:39 AM »

Digging around looking for some stuff, went thru my 70 valve covers .....  Here's the best example I have of an original emissions decal on the drivers side cover. (these covers were off a low mileage 70CJ  parted out in 1983 after an accident in the mid 1970's) Every example I have (4-5 sets of covers, pics of about a dozen more) has that chunk of sticker missing over the recess for the valve cover bolt.    John

2

1964 1/2 - 1965 / Re: Unusual 64.5-Early 65 Lug Wrench

« Last post by krelboyne on Today at 01:29:59 AM »

Very likely the same one(s) from my posting in reply #1 of the linked thread. I sold 5-6 ratchets to that seller.

3

Wanted Ads / Re: WTB nice OEM C6AE 289 4 blade fan blade

« Last post by 21.04 on May 05, 2024, 10:06:58 PM »

Thanks for your offer Bob.  The projected build of my car is Aug 12, '66 so your 3 blades may be a bit late, but I appreciate you for looking. 

-Matt

4

General Discussion / Re: AACA Sr. Grand National 1968 Metuchen Coupe

« Last post by kkupec02 on May 05, 2024, 09:12:11 PM »

Congrats

5

General Discussion / Re: AACA Sr. Grand National 1968 Metuchen Coupe

« Last post by ruppstang on May 05, 2024, 09:07:25 PM »

Congrats, beautiful car!

6

1968 Mustang / Re: Spare Tire Trunk/Gas Tank Board

« Last post by wll17057 on May 05, 2024, 08:40:39 PM »

Thanks to David Knab for the picture of the trunk board.

Although it's a minor detail, I want to install a trunk board in our 1968 Metuchen Coupe.  After reading some of the associated posts, the board was intended to protect the tank from the jack (?).  Can anyone tell me what the board was made of, and the dimensions?  I haven't found any in supplier websites and it seems easy enough to make.  I have the original trunk mat, and want to add the board. 

Thanks everyone.

Bill Leonard
1968 Metuchen Coupe
8T01T225520 / 65A U 2AA 31U 16 6 1

7

1964 1/2 - 1965 / Re: Holes in dash

« Last post by birddog on May 05, 2024, 08:37:48 PM »

I got some dash holes welded. The first picture is directly under the ignition switch. Going off J-speegle pictures. The green circle is an under dash light. The red is not used. The other two look like clean holes. Are these factory or add on?s


The second picture is directly under the glovebox. The green circle is obviously factory. The next hole closest looks like maybe a factory hole. A little worn out. And the furthest red circle is the same size as the first but more worn and maybe rusted out. Are the red circles factory? Thanks.

8

General Discussion / AACA Sr. Grand National 1968 Metuchen Coupe

« Last post by wll17057 on May 05, 2024, 08:30:12 PM »

Hi Everyone.  We are pleased to let everyone know we won the AACA Sr Grand National Award for our 1968 Metuchen Coupe.  This award was won April 2024 at the AACA Grand National Meet in Charlotte North Carolina, scoring a minimum of 390 out of 400 points.  Thanks to everyone on the Concours Mustang Forum for all the refinement suggestions and help that we used to attain this level.

Bill Leonard
1968 Mustang Coupe
Metuchen
8T01T225520 / 65A U 2AA 31U 16 6 1

9

1964 1/2 - 1965 / Unusual 64.5-Early 65 Lug Wrench

« Last post by s2ms on May 05, 2024, 07:27:32 PM »

Came across an ebay auction, https://www.ebay.com/itm/135043221468, with an early style open handle lug wrench I had not seen before, #1 in the photo below with a plate on the back covering the socket opening. Anyone know that this is for?

A quick search showed only one other thread with a photo of one of these but no discussion.....https://www.concoursmustang.com/forum/index.php?topic=19491.

Thanks,
Dave

10

Wanted Ads / Top Loader Transmission Cover

« Last post by Craners on May 05, 2024, 12:54:03 PM »

Wanted:

NOS Top Loader Cover
Ford Part Number: C4AZ 7222 A

Must be no pits.
I might be interested in a very good used OEM.

Thank you

Fran