ConcoursMustang Forums
Restoring - General discussions that span across many different groups of years and models => Interior & Trunk => Topic started by: OldMustangGuy on April 02, 2016, 05:30:34 PM
-
Has anyone developed a good technique for restoring the plastic fresh air vent can? I've experimented with a couple of ideas (in places that can't bee seen fortunately) and can't come up with anything that doesn't make it worse. Will a gloss black paint stick to it?
-
I cleaned my 66 vent "can" with soap and water, then painted it with semi-gloss clear.
Jim
-
How did that do in terms of covering the scratches?...I was thinking in my case to do a coat of paint and then clear.
-
Try Krylon Fusion.
-
I tried the Krylon and have to say it looks pretty good. Now we'll see how well it adheres. Fortunately that part is more or less out of the way once installed.
-
If the scratches are only minor you can use toothpaste to polish them and return the glossy finish. Also available in a finer grain are plastic polishes and glaze from places like TAP plastics
-
I have Novus here. It works great for plastics, especially clear. It can even remove some fine scratches, and even helps hide some blemishes.
-Keith
http://www.amazon.com/s/?ie=UTF8&keywords=novus+plastic+polish&tag=geminimobiles-20&index=aps&hvadid=22349794&hvqmt=e&hvbmt=e&hvdev=c&ref=pd_sl_48brxno6t4_e
-
I have Novus here. It works great for plastics, especially clear. It can even remove some fine scratches, and even helps hide some blemishes.
That is the stuff I was referring to that is available at Tap stores locally and online
Been happy with it
-
What is a "Tap" store? The Novus is formulated for plastics. I used it on the rear convertible windows. You can also use Blue Magic on plastics to good effect. Once again, a modeler's trick.
-Keith
-
What is a "Tap" store? The Novus is formulated for plastics. I used it on the rear convertible windows. You can also use Blue Magic on plastics to good effect. Once again, a modeler's trick.
-Keith
As mention in my first post TAP plastics
West Coast chain (Calif to Washington state) that sells fiberglass, plastic, acrylic plus other similar material sheets, shapes and so on for projects and making things. Place we use to use for supplies for vacuum forming bodies for RC, models and such plus a ton of other things. Last thing I purchased there was thin sheets I used to form a mask (vacuum formed in the oven then placed on a home made vacuum forming frame) for a Boss 302 intake manifold that was shown in my 69 Boss 302 thread
http://www.tapplastics.com/ (http://www.tapplastics.com/)
-
Good idea, Jeff!
-
Some plastics information. Starting in 67 or 68, Ford's plastic items, consoles, vents, etc, were made with the mold release included in the plastic (64-66 Mustang plastic parts, consoles specifically, used a spray into the mold as release agent). What this means is for 67 and/or on up, a "special" plastics epoxy must be used or it will peel off, aka won't stick. For 66 and older regular epoxy will work. I found out about this on a 69 Sportsroof with a damaged console and damaged covers for the rear quarter windows. The "special" plastics epoxy will work in almost all situations. TAP Plastics http://www.tapplastics.com/ has this stuff. I don't know the brand name or any other info, so ask them. For me, it's a local store and I go in and ask.
A heads up.
Jim
-
Jim, Permatex makes a plastic specific glue that I used for seat back repairs, as well as some of the fibreplastic panels in the rear of the vehicle. I even used it to fix chips, and made up an edge that was missing. It's called Permapoxy 5 Minute Plastic Weld. I tried the GT Motorsports Plastex repair kit with poor results. However, they do have a block that can be heated and used a a mold. I heated it up, took an imprint from the other seatback, mixed the Permatex and filled up the damaged portion. I picked up the grain of the panel from the other back and it looks good! I twisted and flexed the back, and it's a rock solid repair. It dries in the same color as the bare fibreplastic material. Just food for thought.
-Keith
-
Along the same line as a few recent comments, I have some Meguiar's 2-step headlamp restoration products I will adapt for use on my plastic vent. Available at your local parts store if you don't have any of the specialty stores mentioned or don't wish to wait for an online order.
Hmmm...Since I have my AC system all apart & cleaned and a few of these items are plastic (e.g heater plenum, air management plenum, plastic AC elbows), looks like several things could use a good thorough cleaning ;) Maybe try that 2nd stage spray on the fiberglass pieces too ;)
-
Any polish/wax combo would be ok. I've used Mother's mag/chrome polish before too.
Personally I wouldn't clear coat unless they were really bad and in that case, would probably do a light coat of plastic/vinyl dye.