Recent Posts

1

1968 Mustang / Re: Spare Tire Trunk/Gas Tank Board

« Last post by wll17057 on Today at 08:40:39 PM »

Thanks to David Knab for the picture of the trunk board.

Although it's a minor detail, I want to install a trunk board in our 1968 Metuchen Coupe.  After reading some of the associated posts, the board was intended to protect the tank from the jack (?).  Can anyone tell me what the board was made of, and the dimensions?  I haven't found any in supplier websites and it seems easy enough to make.  I have the original trunk mat, and want to add the board. 

Thanks everyone.

Bill Leonard
1968 Metuchen Coupe
8T01T225520 / 65A U 2AA 31U 16 6 1

2

1964 1/2 - 1965 / Re: Holes in dash

« Last post by birddog on Today at 08:37:48 PM »

I got some dash holes welded. The first picture is directly under the ignition switch. Going off J-speegle pictures. The green circle is an under dash light. The red is not used. The other two look like clean holes. Are these factory or add on?s


The second picture is directly under the glovebox. The green circle is obviously factory. The next hole closest looks like maybe a factory hole. A little worn out. And the furthest red circle is the same size as the first but more worn and maybe rusted out. Are the red circles factory? Thanks.

3

General Discussion / AACA Sr. Grand National 1968 Metuchen Coupe

« Last post by wll17057 on Today at 08:30:12 PM »

Hi Everyone.  We are pleased to let everyone know we won the AACA Sr Grand National Award for our 1968 Metuchen Coupe.  This award was won April 2024 at the AACA Grand National Meet in Charlotte North Carolina, scoring a minimum of 390 out of 400 points.  Thanks to everyone on the Concours Mustang Forum for all the refinement suggestions and help that we used to attain this level.

Bill Leonard
1968 Mustang Coupe
Metuchen
8T01T225520 / 65A U 2AA 31U 16 6 1

4

1964 1/2 - 1965 / Unusual 64.5-Early 65 Lug Wrench

« Last post by s2ms on Today at 07:27:32 PM »

Came across an ebay auction, https://www.ebay.com/itm/135043221468, with an early style open handle lug wrench I had not seen before, #1 in the photo below with a plate on the back covering the socket opening. Anyone know that this is for?

A quick search showed only one other thread with a photo of one of these but no discussion.....https://www.concoursmustang.com/forum/index.php?topic=19491.

Thanks,
Dave

5

Wanted Ads / Top Loader Transmission Cover

« Last post by Craners on Today at 12:54:03 PM »

Wanted:

NOS Top Loader Cover
Ford Part Number: C4AZ 7222 A

Must be no pits.
I might be interested in a very good used OEM.

Thank you

Fran

6

Wanted Ads / 1968 Mustang Door Glass, Fastback, Clear , 8E

« Last post by Craners on Today at 12:48:56 PM »

Wanted: Original 1968 Mustang Fastback Drivers Side (left) door glass. Clear. Dated 8E
Good quality door glass and surround is a must.   

Possible trade with similar quality 6K  dated assembly.
Thank you
Fran

7

Wanted Ads / 1968 Mustang Vent Glass & Latch ( left, drivers side) Dated 7G

« Last post by Craners on Today at 12:36:08 PM »

Wanted:
Original, clear vent glass for drivers side.  No scratches or chips.
Date code: 7G

Original, drivers side vent window latch core for rechrome. No pits.

Thank you. 

Fran
?.
Sourced!!
No longer searching. 

8

Wanted Ads / Re: WTB nice OEM C6AE 289 4 blade fan blade

« Last post by Bob Gaines on Today at 12:52:29 AM »

I have 3 C6AE-E.  Marked M66, A67, B76 . They all have various amounts of surface rust as they are unrestored.

9

Wanted Ads / Re: WTB nice OEM C6AE 289 4 blade fan blade

« Last post by 21.04 on May 04, 2024, 09:22:16 PM »

Looking for a 4 blade fan stamped C6AE E for standard 289 w/o A/C. 

10

Interior & Trunk / Re: Mustang 67 red upholstery (deluxe)

« Last post by ruppstang on May 04, 2024, 08:27:11 PM »

Hi Josh, welcome to the site. I agree that the piping looks off on the TMI covers. Sadly, that is often the case with reproduction materials, close is good enough. If you want it right, you may have to look for NOS materials. That also is not always easy either. Distinctive is another company that makes covers. You may want to ask them for a sample.