ConcoursMustang Forums
Restoring - General discussions that span across many different groups of years and models => Parts => Topic started by: Oz390 on July 22, 2015, 08:10:43 AM
-
Does anyone have a photo of the correct install of the extension that screws to the tab on the valve cover?
C code GT/CS, late April '68 build date.
I think it faces forward, but am not sure, and I am unsure if there is a defined correct installation, as to which side of the tab on the valve cover it attaches to and which way the screws were applied....
Have looked on the webernet for pics, but could not find any that clearly showed this detail.
???
-
"points" forward and is painted with the engine
Picture (from sort of below) of one in the library under San Jose - 64-70 section,
Thread 68 San Jose - Engine Installation - 10307-12 First in Series
Here some additional original examples - Well sort of ::)
(http://www.concoursmustang.com/forum/gallery/4/6-220715155620-4351871.jpeg)
(http://www.concoursmustang.com/forum/gallery/4/6-220715155619-434328.jpeg)
(http://www.concoursmustang.com/forum/gallery/4/6-220715155621-43521272.jpeg)
-
Jeff, perfect.
Thank you!
-
Ooooh! A WHITE spark plug wire seperator! :o
-
Ooooh! A WHITE spark plug wire seperator! :o
Or just a bad angle for the camera and a reflection - like the top of the valve cover :)
Unfortunately no addition pictures of that detail from this car
But I did find a few examples going through my pictures