Topic: GT350 PCV Hose

[S412gofast]

What is the correct PCV hose for a GT350.  Did Shelby use or modify the Ford C6AZ-6A664-N (PCV to carburetor spacer plate) hose? 
Or Did Shelby use another part number hose?

I see this hose listed by Virginia Classic Mustang, however it looks as if it will not work with the PCV hose fitting
I pointing towards 11 O'clock position on the back of the intake.
https://www.virginiaclassicmustang.com/PCV-Valve-to-Intake-Fitting-Hose-for-65-67-GT350-Shelby-P482251.aspx

[Bob Gaines]

What is the correct PCV hose for a GT350.  Did Shelby use or modify the Ford C6AZ-6A664-N (PCV to carburetor spacer plate) hose? 
Or Did Shelby use another part number hose?

I see this hose listed by Virginia Classic Mustang, however it looks as if it will not work with the PCV hose fitting
I pointing towards 11 O'clock position on the back of the intake.
https://www.virginiaclassicmustang.com/PCV-Valve-to-Intake-Fitting-Hose-for-65-67-GT350-Shelby-P482251.aspx

The process was of modifying (cutting) the stock Ford PCV hose . That practice was started at SA in early 65 production by SA and was continued by Ford Cleveland engine plant for all of the rest of Shelby years of production. The hose that VCM sells will work too but does not look as correct IMO.

[S412gofast]

The process was of modifying (cutting) the stock Ford PCV hose . That practice was started at SA in early 65 production by SA and was continued by Ford Cleveland engine plant for all of the rest of Shelby years of production. The hose that VCM sells will work too but does not look as correct IMO.

Thanks Bob