Author Topic: Rebuilding clutch fan part # C8OE-B  (Read 1799 times)

Offline keeper

  • Full Member
  • ***
  • Posts: 139
Rebuilding clutch fan part # C8OE-B
« on: May 08, 2020, 04:03:32 AM »
So I recently purchased a used NOS C8OE-B clutch fan for a 69 SCJ that looks great, spins free but high speeds it makes noise so I am told. I have looked for a rebuild kit and or some one that can do the work and provide parts. I have had no good results as of this post. Any leads would be wonderful. Thanks for looking at my post. Keeper
Keith 69 Mach1TopLoader/Vcode SJ

Offline ruppstang

  • Hero Member
  • *****
  • Posts: 3849
Re: Rebuilding clutch fan part # C8OE-B
« Reply #1 on: May 08, 2020, 09:01:16 AM »
There is a Corvette guy that rebuilds them but I can not remember his name. I understood that it took him a long time to do the work and it was pricy that is why I purchased a very nice reproduction from Chris Brown. He can even stamp the correct part numbers on it.

Best of luck

Offline lancelot66

  • Sr. Member
  • ****
  • Posts: 302
Re: Rebuilding clutch fan part # C8OE-B
« Reply #2 on: May 08, 2020, 02:35:30 PM »
This is the guy (Vinny) but if I'm remembering correctly, he retired a year or two ago:

PAMPERED CORVETTES
64 Robin Drive
Tiverton, RI 02878
www.pamperedcorvettes.com
401-314-6811

If he did, it's a real shame. He did really awesome work!
VR/
-Lance

SJ Build Date: 1/6
'66 Fstbk: 63A M 25 06A 71 1 6
Many Original Options

Offline J_Speegle

  • Administrator
  • Hero Member
  • *****
  • Posts: 24266
Jeff Speegle

Anything worth doing is worth doing concours ;)

Offline keeper

  • Full Member
  • ***
  • Posts: 139
Re: Rebuilding clutch fan part # C8OE-B
« Reply #4 on: May 09, 2020, 12:17:18 AM »
Thank you gentlemen. Gave me some good leads to be sure. Chris Brown ? Is he on this forum ?
Keith 69 Mach1TopLoader/Vcode SJ

Offline J_Speegle

  • Administrator
  • Hero Member
  • *****
  • Posts: 24266
Re: Rebuilding clutch fan part # C8OE-B
« Reply #5 on: May 09, 2020, 12:42:57 AM »
Thank you gentlemen. Gave me some good leads to be sure. Chris Brown ? Is he on this forum ?


He is a member but often to busy to spend much time on the forums. Uses the screen name cbrown so maybe a PM will get him

Email is posted in the following thread ;)

http://www.concoursmustang.com/forum/index.php?topic=17820.msg113777#msg113777
Jeff Speegle

Anything worth doing is worth doing concours ;)

Offline Bob Gaines

  • Global Moderator
  • Hero Member
  • ****
  • Posts: 9036
Re: Rebuilding clutch fan part # C8OE-B
« Reply #6 on: May 09, 2020, 01:12:39 AM »
Or better yet Chris has a website that has info on the fan clutches he has. http://www.brownsautobodyservices.com/shop
Bob Gaines,Shelby enthusiast, Shelby collector , Shelby concours judge SAAC,MCA,Mid America Shelby

Offline keeper

  • Full Member
  • ***
  • Posts: 139
Re: Rebuilding clutch fan part # C8OE-B
« Reply #7 on: May 09, 2020, 12:12:22 PM »
Thank you J Speegle and others. This forum is incredible. BTW, the fan clutch I purchased will be replacing an after market fan blade with no clutch. The radiator is a nice after market one as well. Interesting enough the motor runs on the cool side and I am told CJ motors run hot in many instances. I hope I don't end up fixing something that really needs not fixed. LoL ... My goal is to make the car closer to driver concourse than it is now. Thanks to this forum I was able to locate a fan clutch and radiator in one evening. Bob Gaines is huge help.
Keith 69 Mach1TopLoader/Vcode SJ

Offline RoyceP

  • Hero Member
  • *****
  • Posts: 1518
Re: Rebuilding clutch fan part # C8OE-B
« Reply #8 on: May 09, 2020, 01:26:32 PM »
I had one done by Vinny about 10 years ago. He had it for about 18 months. It looked great and worked great when I got it back but he would not answer emails or calls. It was overall not something I would do again.
1968 W code 427 Cougar XR-7 GTE Feb 23 Dearborn C6 / 3.50 open
1968 R code 428CJ Cougar XR-7 May 13 Dearborn C6 / 3.91 T - Lock

Offline rockhouse66

  • Hero Member
  • *****
  • Posts: 931
Re: Rebuilding clutch fan part # C8OE-B
« Reply #9 on: May 09, 2020, 10:05:15 PM »
Royce - are you sure that was Vinny and not the guy in Florida?  He took forever!
Jim
'66 GT FB

Offline RoyceP

  • Hero Member
  • *****
  • Posts: 1518
Re: Rebuilding clutch fan part # C8OE-B
« Reply #10 on: May 11, 2020, 11:54:25 AM »
I don't think it was ever in Florida. The last time I needed one I bought the reproduction from the body shop in Louisiana. Very nice piece, near perfect.

Royce - are you sure that was Vinny and not the guy in Florida?  He took forever!
1968 W code 427 Cougar XR-7 GTE Feb 23 Dearborn C6 / 3.50 open
1968 R code 428CJ Cougar XR-7 May 13 Dearborn C6 / 3.91 T - Lock

Offline preaction

  • Hero Member
  • *****
  • Posts: 1326
Re: Rebuilding clutch fan part # C8OE-B
« Reply #11 on: May 11, 2020, 02:29:24 PM »
Pampered Corvetts has been in florida for some years now he did a clutch for me and it came back in fair time and was great.
« Last Edit: May 29, 2020, 01:26:33 PM by preaction »
8F02R218047-  July 18 1968   Dearborn

Offline DragPack69

  • Jr. Member
  • **
  • Posts: 57
Re: Rebuilding clutch fan part # C8OE-B
« Reply #12 on: May 28, 2020, 07:49:15 PM »
I believe his name was Fred oliva
From fla.
I had him do mine about 15 yrs ago.
Took about 10 months to get it back.
Not sure he's even alive now.

John

Offline rockhouse66

  • Hero Member
  • *****
  • Posts: 931
Re: Rebuilding clutch fan part # C8OE-B
« Reply #13 on: May 29, 2020, 08:27:06 AM »
Fred is the guy I thought Royce might have been referring to.  He had mine for a year.  Vinny is now in Florida, retired or semi-retired.
Jim
'66 GT FB