ConcoursMustang Forums

1st Generation 1964 1/2 - 1973 - Questions & general discussions that apply to a specific year => 1966 Mustang => Topic started by: rrenz on January 13, 2018, 08:59:53 PM

Title: 66 C-Code Single Groove pulley's
Post by: rrenz on January 13, 2018, 08:59:53 PM: In search of original Single groove water and crank pulleys for my late January c code. For the water pump would a C5AE-8509-B be suitable? C5AZ-6312-B for the crank? Ive seen some reproduction water pump pulley's that appear to be of a 2 piece design.
Title: Re: 66 C-Code Single Groove pulley's
Post by: jwc66k on January 14, 2018, 12:13:32 AM: Ryan,
Did you look in the library? In any case, I think that you will find almost all the upper and lower pulleys are multiple pieces.
Jim
Title: Re: 66 C-Code Single Groove pulley's
Post by: rrenz on January 14, 2018, 10:59:55 AM: Thanks. Didn't realize there was a spreadsheet on this.
Title: Re: 66 C-Code Single Groove pulley's
Post by: J_Speegle on January 14, 2018, 03:36:31 PM: Remember that though some pulleys are made from multiple pieces they are not designed to come apart and be used separately
Title: Re: 66 C-Code Single Groove pulley's
Post by: Hipo giddyup on January 15, 2018, 09:17:17 AM: Hi rrenz . PM me if you are still searching for those pulleys. I have a stack from previous 289s that I have scavenged and might have what you need. Plus I think you're not too far from me which would make for cheaper shipping. Just trying to help.. ;)
Title: Re: 66 C-Code Single Groove pulley's
Post by: Hipo giddyup on January 16, 2018, 10:33:53 PM: Unfortunately I do not seem to have single groove pulleys with the stamps you are looking for.. :'(
Title: Re: 66 C-Code Single Groove pulley's
Post by: Bob Gaines on January 16, 2018, 11:05:30 PM: Quote from: rrenz on January 13, 2018, 08:59:53 PM
In search of original Single groove water and crank pulleys for my late January c code. For the water pump would a C5AE-8509-B be suitable? C5AZ-6312-B for the crank? Ive seen some reproduction water pump pulley's that appear to be of a 2 piece design.
I think the C5AE-A crank pulley goes with the C5AE-B W/P pulley.
Title: Re: 66 C-Code Single Groove pulley's
Post by: rrenz on February 03, 2018, 01:46:05 PM: Many thanks to Hipo giddyup for helping me out with some pulleys. Finally got this project wrapped up. Previous car this engine was in was set up with AC so finally got the pulleys, fan and water pump bolts replaced.
Title: Re: 66 C-Code Single Groove pulley's
Post by: Hipo giddyup on February 03, 2018, 03:00:05 PM: Glad I could help and man does that compartment look nice and clean!
Title: Re: 66 C-Code Single Groove pulley's
Post by: rrenz on February 08, 2018, 05:53:30 PM: Quote from: Hipo giddyup on February 03, 2018, 03:00:05 PM
Glad I could help and man does that compartment look nice and clean!

Thanks. Im still plugging away at minor details here and there but very happy with where I've gotten to. None of which would of been possible without this site for sure.