Author Topic: '69 Rear Spoiler Mounting Hardware  (Read 779 times)

Offline Aussie_Boss302

  • Full Member
  • ***
  • Posts: 114
'69 Rear Spoiler Mounting Hardware
« on: May 04, 2020, 07:58:10 PM »
I'm looking for the pieces to mount the '69 spoiler... that's the gaskets, spacers, washers and Tritanium Bolts

Offline dieseldave

  • Newbie
  • *
  • Posts: 44
Re: '69 Rear Spoiler Mounting Hardware
« Reply #1 on: May 04, 2020, 09:29:01 PM »
Heres' the gaskets.    https://www.musclecarresearch.com/6344228-1
Not sure where to get the Tritanium bolts, I need 4 as well.  They are rare, saw a set sell on Epay for big money. I made my own spacers... Dave

Offline jwc66k

  • Hero Member
  • *****
  • Posts: 7136
Re: '69 Rear Spoiler Mounting Hardware
« Reply #2 on: May 05, 2020, 12:37:10 AM »
I promise to be politically correct in all my posts to keep the BBBB from vociferating.

Offline midlife

  • Wiring Guru---let me check your shorts!
  • Global Moderator
  • Hero Member
  • ****
  • Posts: 2158
    • Midlife Harness Restorations
Re: '69 Rear Spoiler Mounting Hardware
« Reply #3 on: May 05, 2020, 08:45:17 AM »
Perhaps he meant unobtainium.
Midlife Harness Restorations - http://midlifeharness.com

Offline PerkinsRestoration

  • Sr. Member
  • ****
  • Posts: 292
Re: '69 Rear Spoiler Mounting Hardware
« Reply #4 on: May 05, 2020, 11:31:13 AM »
Supertanium and Tritanium fasteners manufactured by Premier fasteners Cleveland ,Ohio.  High quality fasteners mandated by many organizations such as USAC in 60's-70's. Most race shops used Premier hardware.

Offline jwc66k

  • Hero Member
  • *****
  • Posts: 7136
Re: '69 Rear Spoiler Mounting Hardware
« Reply #5 on: May 05, 2020, 12:41:10 PM »
Supertanium and Tritanium fasteners manufactured by Premier fasteners Cleveland ,Ohio.  High quality fasteners mandated by many organizations such as USAC in 60's-70's. Most race shops used Premier hardware.
Perhaps he meant unobtainium.
Been watching Star Trek a lot?  8)
Maybe someone don't get out much. Well, there is "the quarantine" -
Jim
I promise to be politically correct in all my posts to keep the BBBB from vociferating.

Offline Brian Conway

  • Hero Member
  • *****
  • Posts: 1623
Re: '69 Rear Spoiler Mounting Hardware
« Reply #6 on: May 05, 2020, 10:05:39 PM »
Picture of the bolts.  Unclear if they were actually part of the original assembly ?  Aussie  Boss302;  you may want to ask ?
5RO9A GT  4 Spd Built 5/29/65
9TO2R SCJ 4 Spd Built 9/19/68
Owner Driver Mechanic
San Diego, Ca.

Offline Aussie_Boss302

  • Full Member
  • ***
  • Posts: 114
Re: '69 Rear Spoiler Mounting Hardware
« Reply #7 on: May 06, 2020, 12:02:43 AM »
Original hardware





From another thread... these are the bolts what I’m looking for

Offline Aussie_Boss302

  • Full Member
  • ***
  • Posts: 114
Re: '69 Rear Spoiler Mounting Hardware
« Reply #8 on: May 06, 2020, 12:06:32 AM »
Picture of the bolts.  Unclear if they were actually part of the original assembly ?  Aussie  Boss302;  you may want to ask ?

Brian, bolts like those were sold on eBay recently for $$$$.  I’m not sure if they are correct.  Perhaps, someone can comment if Supertanium bolts are also correct?

Offline J_Speegle

  • Administrator
  • Hero Member
  • *****
  • Posts: 24232
Re: '69 Rear Spoiler Mounting Hardware
« Reply #9 on: May 06, 2020, 12:46:14 AM »
Picture of the bolts.  Unclear if they were actually part of the original assembly ?  Aussie  Boss302;  you may want to ask ?

Appear to have different head marking than the ones I have that came with an original 69 spoiler. Can make out the work "ALLOY" on the bottom section of the design. Guess those could be removed/modified if they don't match what was used on the line at Dearborn in 69

Good luck with your search. Good thing is that you can install the spoiler and make it right, with ease, once the right ones are found
« Last Edit: May 06, 2020, 12:49:28 AM by J_Speegle »
Jeff Speegle

Anything worth doing is worth doing concours ;)